--- a/src/table/elrail_data.h Fri Sep 07 21:09:37 2007 +0000
+++ b/src/table/elrail_data.h Fri Sep 07 21:11:12 2007 +0000
@@ -229,13 +229,13 @@
}
};
/* Geometric placement of the PCP relative to the tile origin */
-static const int8 x_pcp_offsets[DIAGDIR_END] = {0, 8, 15, 8};
-static const int8 y_pcp_offsets[DIAGDIR_END] = {8, 15, 8, 0};
+static const int8 x_pcp_offsets[DIAGDIR_END] = {0, 8, 16, 8};
+static const int8 y_pcp_offsets[DIAGDIR_END] = {8, 16, 8, 0};
/* Geometric placement of the PPP relative to the PCP*/
-static const int8 x_ppp_offsets[DIR_END] = {-3, -4, -3, 0, 3, 4, 3, 0};
-static const int8 y_ppp_offsets[DIR_END] = {-3, 0, 3, 4, 3, 0, -3, -4};
+static const int8 x_ppp_offsets[DIR_END] = {-2, -4, -2, 0, 2, 4, 2, 0};
+static const int8 y_ppp_offsets[DIR_END] = {-2, 0, 2, 4, 2, 0, -2, -4};
/* The type of pylon to draw at each PPP */
-static const SpriteID pylons_normal[] = {
+static const SpriteID pylon_sprites[] = {
SPR_PYLON_EW_N,
SPR_PYLON_Y_NE,
SPR_PYLON_NS_E,
@@ -246,13 +246,6 @@
SPR_PYLON_X_NW
};
-static const SpriteID pylons_bridge[] = {
- SPR_PYLON_X_NW,
- SPR_PYLON_X_SE,
- SPR_PYLON_Y_NE,
- SPR_PYLON_Y_SW
-};
-
struct SortableSpriteStruct {
SpriteID image;
int8 x_offset;
@@ -265,9 +258,7 @@
enum {
/** Distance between wire and rail */
- ELRAIL_ELEVATION = 8,
- /** Corrects an off-by-one error in some places (tileh 12 and 9) (TODO -- find source of error) */
- ELRAIL_ELEV_CORR = ELRAIL_ELEVATION + 1,
+ ELRAIL_ELEVATION = 10,
/** Wires that a draw one level higher than the north corner. */
ELRAIL_ELEVRAISE = ELRAIL_ELEVATION + TILE_HEIGHT
};
@@ -276,41 +267,41 @@
/* X direction */
/* Flat tiles: */
/* Wires */
- { SPR_WIRE_X_SW, 0, 8, 16, 1, 1, ELRAIL_ELEVATION }, //! 0: Wire in X direction, pylon on the SW end only
- { SPR_WIRE_X_NE, 0, 8, 16, 1, 1, ELRAIL_ELEVATION }, //! 1: Wire in X direction, pylon on the NE end
- { SPR_WIRE_X_SHORT, 0, 8, 16, 1, 1, ELRAIL_ELEVATION }, //! 2: Wire in X direction, pylon on both ends
+ { SPR_WIRE_X_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 0: Wire in X direction, pylon on the SW end only
+ { SPR_WIRE_X_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 1: Wire in X direction, pylon on the NE end
+ { SPR_WIRE_X_SHORT, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 2: Wire in X direction, pylon on both ends
/* "up" tiles */
/* Wires */
- { SPR_WIRE_X_SW_UP, 0, 8, 16, 8, 1, ELRAIL_ELEVRAISE }, //! 3: Wire in X pitch up, pylon on the SW end only
- { SPR_WIRE_X_NE_UP, 0, 8, 16, 8, 1, ELRAIL_ELEVRAISE }, //! 4: Wire in X pitch up, pylon on the NE end
- { SPR_WIRE_X_SHORT_UP, 0, 8, 16, 8, 1, ELRAIL_ELEVRAISE }, //! 5: Wire in X pitch up, pylon on both ends
+ { SPR_WIRE_X_SW_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 3: Wire in X pitch up, pylon on the SW end only
+ { SPR_WIRE_X_NE_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 4: Wire in X pitch up, pylon on the NE end
+ { SPR_WIRE_X_SHORT_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 5: Wire in X pitch up, pylon on both ends
/* "down" tiles */
/* Wires */
- { SPR_WIRE_X_SW_DOWN, 0, 8, 16, 8, 1, ELRAIL_ELEV_CORR }, //! 6: Wire in X pitch down, pylon on the SW end
- { SPR_WIRE_X_NE_DOWN, 0, 8, 16, 8, 1, ELRAIL_ELEV_CORR }, //! 7: Wire in X pitch down, pylon on the NE end
- { SPR_WIRE_X_SHORT_DOWN, 0, 8, 16, 8, 1, ELRAIL_ELEV_CORR }, //! 8: Wire in X pitch down, pylon on both ends
+ { SPR_WIRE_X_SW_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 6: Wire in X pitch down, pylon on the SW end
+ { SPR_WIRE_X_NE_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 7: Wire in X pitch down, pylon on the NE end
+ { SPR_WIRE_X_SHORT_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 8: Wire in X pitch down, pylon on both ends
/* Y direction */
/* Flat tiles: */
/* Wires */
- { SPR_WIRE_Y_SE, 8, 0, 1, 16, 1, ELRAIL_ELEVATION }, //! 9: Wire in Y direction, pylon on the SE end only
- { SPR_WIRE_Y_NW, 8, 0, 1, 16, 1, ELRAIL_ELEVATION }, //!10: Wire in Y direction, pylon on the NW end
- { SPR_WIRE_Y_SHORT, 8, 0, 1, 16, 1, ELRAIL_ELEVATION }, //!11: Wire in Y direction, pylon on both ends
+ { SPR_WIRE_Y_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! 9: Wire in Y direction, pylon on the SE end only
+ { SPR_WIRE_Y_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //!10: Wire in Y direction, pylon on the NW end
+ { SPR_WIRE_Y_SHORT, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //!11: Wire in Y direction, pylon on both ends
/* "up" tiles */
/* Wires */
- { SPR_WIRE_Y_SE_UP, 8, 0, 8, 16, 1, ELRAIL_ELEVRAISE }, //!12: Wire in Y pitch up, pylon on the SE end only
- { SPR_WIRE_Y_NW_UP, 8, 0, 8, 16, 1, ELRAIL_ELEVRAISE }, //!13: Wire in Y pitch up, pylon on the NW end
- { SPR_WIRE_Y_SHORT_UP, 8, 0, 8, 16, 1, ELRAIL_ELEVRAISE }, //!14: Wire in Y pitch up, pylon on both ends
+ { SPR_WIRE_Y_SE_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!12: Wire in Y pitch up, pylon on the SE end only
+ { SPR_WIRE_Y_NW_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!13: Wire in Y pitch up, pylon on the NW end
+ { SPR_WIRE_Y_SHORT_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!14: Wire in Y pitch up, pylon on both ends
/* "down" tiles */
/* Wires */
- { SPR_WIRE_Y_SE_DOWN, 8, 0, 8, 16, 1, ELRAIL_ELEV_CORR }, //!15: Wire in Y pitch down, pylon on the SE end
- { SPR_WIRE_Y_NW_DOWN, 8, 0, 8, 16, 1, ELRAIL_ELEV_CORR }, //!16: Wire in Y pitch down, pylon on the NW end
- { SPR_WIRE_Y_SHORT_DOWN, 8, 0, 8, 16, 1, ELRAIL_ELEV_CORR }, //!17: Wire in Y pitch down, pylon on both ends
+ { SPR_WIRE_Y_SE_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!15: Wire in Y pitch down, pylon on the SE end
+ { SPR_WIRE_Y_NW_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!16: Wire in Y pitch down, pylon on the NW end
+ { SPR_WIRE_Y_SHORT_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!17: Wire in Y pitch down, pylon on both ends
/* NS Direction */
{ SPR_WIRE_NS_SHORT, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!18: LEFT trackbit wire, pylon on both ends
@@ -323,28 +314,28 @@
{ SPR_WIRE_NS_S, 0, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!23: RIGHT trackbit wire, pylon on S end
/* EW Direction */
- { SPR_WIRE_EW_SHORT, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!24: UPPER trackbit wire, pylon on both ends
- { SPR_WIRE_EW_SHORT, 16, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!25: LOWER trackbit wire, pylon on both ends
+ { SPR_WIRE_EW_SHORT, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!24: UPPER trackbit wire, pylon on both ends
+ { SPR_WIRE_EW_SHORT, 15, 8, 3, 3, 1, ELRAIL_ELEVATION }, //!25: LOWER trackbit wire, pylon on both ends
- { SPR_WIRE_EW_W, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!28: UPPER trackbit wire, pylon on both ends
- { SPR_WIRE_EW_W, 16, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!29: LOWER trackbit wire, pylon on both ends
+ { SPR_WIRE_EW_W, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!28: UPPER trackbit wire, pylon on both ends
+ { SPR_WIRE_EW_W, 15, 8, 3, 3, 1, ELRAIL_ELEVATION }, //!29: LOWER trackbit wire, pylon on both ends
- { SPR_WIRE_EW_E, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!32: UPPER trackbit wire, pylon on both ends
- { SPR_WIRE_EW_E, 16, 8, 8, 8, 1, ELRAIL_ELEVATION } //!33: LOWER trackbit wire, pylon on both ends
+ { SPR_WIRE_EW_E, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!32: UPPER trackbit wire, pylon on both ends
+ { SPR_WIRE_EW_E, 15, 8, 3, 3, 1, ELRAIL_ELEVATION } //!33: LOWER trackbit wire, pylon on both ends
};
static const SortableSpriteStruct CatenarySpriteData_Depot[] = {
- { SPR_WIRE_DEPOT_NE, 0, 8, 8, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE depot exit
- { SPR_WIRE_DEPOT_SE, 8, 0, 1, 8, 1, ELRAIL_ELEVATION }, //! Wire for SE depot exit
- { SPR_WIRE_DEPOT_SW, 0, 8, 8, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW depot exit
- { SPR_WIRE_DEPOT_NW, 8, 0, 1, 8, 1, ELRAIL_ELEVATION } //! Wire for NW depot exit
+ { SPR_WIRE_DEPOT_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE depot exit
+ { SPR_WIRE_DEPOT_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! Wire for SE depot exit
+ { SPR_WIRE_DEPOT_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW depot exit
+ { SPR_WIRE_DEPOT_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION } //! Wire for NW depot exit
};
static const SortableSpriteStruct CatenarySpriteData_Tunnel[] = {
- { SPR_WIRE_TUNNEL_NE, 0, 8, 8, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE tunnel exit
- { SPR_WIRE_TUNNEL_SE, 8, 0, 1, 8, 1, ELRAIL_ELEVATION }, //! Wire for SE tunnel exit
- { SPR_WIRE_TUNNEL_SW, 0, 8, 8, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW tunnel exit
- { SPR_WIRE_TUNNEL_NW, 8, 0, 1, 8, 1, ELRAIL_ELEVATION } //! Wire for NW tunnel exit
+ { SPR_WIRE_TUNNEL_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE tunnel exit
+ { SPR_WIRE_TUNNEL_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! Wire for SE tunnel exit
+ { SPR_WIRE_TUNNEL_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW tunnel exit
+ { SPR_WIRE_TUNNEL_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION } //! Wire for NW tunnel exit
};