(svn r13729) -Fix: assumption that non-north tiles of a house do not have the 1x1 building bit set was flawed with some NewGRFs. This caused the amount of houses to differ, which causes the town radii to differ, which causes desyncs when towns are expanded.
# Auto-generated file -- DO NOT EDIT
# Check if we want to show what we are doing
ifdef VERBOSE
Q =
else
Q = @
endif
include Makefile.am
SOURCE_LIST = !!SOURCE_LIST!!
CONFIG_CACHE_SOURCE_LIST = !!CONFIG_CACHE_SOURCE_LIST!!
CONFIGURE_FILES = !!CONFIGURE_FILES!!
LIPO = !!LIPO!!
BIN_DIR = !!BIN_DIR!!
SRC_DIR = !!SRC_DIR!!
ROOT_DIR = !!ROOT_DIR!!
BUNDLE_DIR = "$(ROOT_DIR)/bundle"
BUNDLES_DIR = "$(ROOT_DIR)/bundles"
INSTALL_DIR = !!INSTALL_DIR!!
INSTALL_BINARY_DIR = "$(INSTALL_DIR)/"!!BINARY_DIR!!
INSTALL_ICON_DIR = "$(INSTALL_DIR)/"!!ICON_DIR!!
INSTALL_DATA_DIR = "$(INSTALL_DIR)/"!!DATA_DIR!!
TTD = !!TTD!!
TTDS = $(SRC_DIRS:%=%/$(TTD))
OS = !!OS!!
OSXAPP = !!OSXAPP!!
REVISION = !!REVISION!!
AWK = !!AWK!!
DISTCC = !!DISTCC!!
RES := $(shell if ! [ -f $(CONFIG_CACHE_SOURCE_LIST) ] || [ -n "`cmp $(CONFIG_CACHE_SOURCE_LIST) $(SOURCE_LIST)`" ]; then cp $(SOURCE_LIST) $(CONFIG_CACHE_SOURCE_LIST); fi )
all: config.cache
ifdef DISTCC
@if [ -z "`echo '$(MFLAGS)' | grep '\-j'`" ]; then echo; echo "WARNING: you enabled distcc support, but you don't seem to be using the -jN paramter"; echo; fi
endif
@for dir in $(DIRS); do \
$(MAKE) -C $$dir all; \
done
ifdef LIPO
# Lipo is an OSX thing. If it is defined, it means we are building for universal,
# and so we have have to combine the binaries into one big binary
# Remove the last binary made by the last compiled target
$(Q)rm -f $(BIN_DIR)/$(TTD)
# Make all the binaries into one
$(Q)$(LIPO) -create -output $(BIN_DIR)/$(TTD) $(TTDS)
endif
help:
@echo "Available make commands:"
@echo ""
@echo "Compilation:"
@echo " all compile the executable and the lang files"
@echo " lang compile the lang files only"
@echo "Clean up:"
@echo " clean remove the files generated during compilation"
@echo " mrproper remove the files generated during configuration and compilation"
@echo "Run after compilation:"
@echo " run execute openttd after the compilation"
@echo " run-gdb execute openttd in debug mode after the compilation"
@echo " run-prof execute openttd in profiling mode after the compilation"
@echo "Installation:"
@echo " install install the compiled files and the data-files after the compilation"
@echo " bundle create the base for an installation bundle"
@echo " bundle_zip create the zip installation bundle"
@echo " bundle_gzip create the gzip installation bundle"
@echo " bundle_bzip2 create the bzip2 installation bundle"
@echo " bundle_lha create the lha installation bundle"
@echo " bundle_dmg create the dmg installation bundle"
config.cache: $(CONFIG_CACHE_SOURCE_LIST) $(CONFIGURE_FILES)
ifeq ($(shell if test -f config.cache; then echo 1; fi), 1)
@echo "----------------"
@echo "The system detected that source.list or any configure file is altered."
@echo " Going to reconfigure with last known settings..."
@echo "----------------"
# Make sure we don't lock config.cache
@$(shell cat config.cache | sed 's/\\ /\\\\ /g') || exit 1
@echo "----------------"
@echo "Reconfig done. Now compiling..."
@echo "----------------"
else
@echo "----------------"
@echo "Have not found a configuration, please run configure first."
@echo "----------------"
@exit 1
endif
clean:
@for dir in $(DIRS); do \
$(MAKE) -C $$dir clean; \
done
$(Q)rm -rf $(BUNDLE_TARGET)
lang:
@for dir in $(LANG_DIRS); do \
$(MAKE) -C $$dir all; \
done
mrproper:
@for dir in $(DIRS); do \
$(MAKE) -C $$dir mrproper; \
rm -f $$dir/Makefile; \
done
$(Q)rm -rf objs
$(Q)rm -f Makefile Makefile.am
$(Q)rm -f $(CONFIG_CACHE_SOURCE_LIST) config.cache config.log
$(Q)rm -rf $(BUNDLE_DIR)
$(Q)rm -rf $(BUNDLES_DIR)
depend:
@for dir in $(SRC_DIRS); do \
$(MAKE) -C $$dir depend; \
done
run: all
$(Q)cd !!BIN_DIR!! && ./!!TTD!! $(OPENTTD_ARGS)
run-gdb: all
$(Q)cd !!BIN_DIR!! && gdb --ex run --args ./!!TTD!! $(OPENTTD_ARGS)
run-prof: all
$(Q)cd !!BIN_DIR!! && ./!!TTD!! $(OPENTTD_ARGS) && gprof !!TTD!! | less
%.o:
@for dir in $(SRC_DIRS); do \
$(MAKE) -C $$dir $(@:src/%=%); \
done
%.lng:
@for dir in $(LANG_DIRS); do \
$(MAKE) -C $$dir $@; \
done
#
# Creation of bundles
#
# The revision is needed for the bundle name and creating an OSX application bundle.
ifdef REVISION
REV := $(REVISION)
else
# Are we a SVN dir?
ifeq ($(shell if test -d $(SRC_DIR)/.svn; then echo 1; fi), 1)
# Find if the local source if modified
REV_MODIFIED := $(shell svnversion $(SRC_DIR) | sed -n 's/.*\(M\).*/\1/p' )
# Find the revision like: rXXXX-branch
REV := $(shell LC_ALL=C svn info $(SRC_DIR) | $(AWK) '/^URL:.*branches/ { split($$2, a, "/"); BRANCH="-"a[5] } /^Last Changed Rev:/ { REV="r"$$4"$(REV_MODIFIED)" } END { print REV BRANCH }')
endif
endif
# Make sure we have something in REV
ifeq ($(REV),)
REV := norev000
endif
ifndef BUNDLE_NAME
BUNDLE_NAME = OTTD-$(OS)-custom-$(REV)
endif
# An OSX application bundle needs the data files, lang files and openttd executable in a different location.
ifdef OSXAPP
DATA_DIR = $(BUNDLE_DIR)/$(OSXAPP)/Contents/Resources/data
LANG_DIR = $(BUNDLE_DIR)/$(OSXAPP)/Contents/Resources/lang
TTD_DIR = $(BUNDLE_DIR)/$(OSXAPP)/Contents/MacOS
else
DATA_DIR = $(BUNDLE_DIR)/data
LANG_DIR = $(BUNDLE_DIR)/lang
TTD_DIR = $(BUNDLE_DIR)
endif
bundle: all
@echo '[BUNDLE] Constructing bundle'
$(Q)rm -rf "${BUNDLE_DIR}"
$(Q)mkdir -p "${BUNDLE_DIR}"
$(Q)mkdir -p "$(BUNDLE_DIR)/docs"
$(Q)mkdir -p "$(BUNDLE_DIR)/scenario"
$(Q)mkdir -p "$(BUNDLE_DIR)/scenario/heightmap"
$(Q)mkdir -p "$(BUNDLE_DIR)/media"
$(Q)mkdir -p "$(TTD_DIR)"
$(Q)mkdir -p "$(DATA_DIR)"
$(Q)mkdir -p "$(LANG_DIR)"
ifdef OSXAPP
$(Q)mkdir -p "$(BUNDLE_DIR)/$(OSXAPP)/Contents/Resources"
$(Q)echo "APPL????" > "$(BUNDLE_DIR)/$(OSXAPP)/Contents/PkgInfo"
$(Q)cp "$(ROOT_DIR)/os/macosx/openttd.icns" "$(BUNDLE_DIR)/$(OSXAPP)/Contents/Resources/openttd.icns"
$(Q)$(ROOT_DIR)/os/macosx/plistgen.sh "${BUNDLE_DIR}/$(OSXAPP)" "$(REV)"
$(Q)cp "$(ROOT_DIR)/docs/OSX_install_instructions.txt" "$(BUNDLE_DIR)/docs/"
$(Q)cp "$(ROOT_DIR)/os/macosx/splash.png" "$(DATA_DIR)"
endif
$(Q)cp "$(BIN_DIR)/$(TTD)" "$(TTD_DIR)/"
$(Q)cp "$(BIN_DIR)/data/"*.grf "$(DATA_DIR)/"
$(Q)cp "$(BIN_DIR)/data/opntitle.dat" "$(DATA_DIR)/"
$(Q)cp "$(BIN_DIR)/lang/"*.lng "$(LANG_DIR)/"
$(Q)cp "$(ROOT_DIR)/readme.txt" "$(BUNDLE_DIR)/"
$(Q)cp "$(ROOT_DIR)/COPYING" "$(BUNDLE_DIR)/"
$(Q)cp "$(ROOT_DIR)/known-bugs.txt" "$(BUNDLE_DIR)/docs/"
$(Q)cp "$(ROOT_DIR)/docs/multiplayer.txt" "$(BUNDLE_DIR)/docs/"
$(Q)cp "$(ROOT_DIR)/docs/32bpp.txt" "$(BUNDLE_DIR)/docs/"
$(Q)cp "$(ROOT_DIR)/changelog.txt" "$(BUNDLE_DIR)/docs/"
$(Q)cp "$(ROOT_DIR)/media/openttd.64.png" "$(BUNDLE_DIR)/media/"
$(Q)cp "$(ROOT_DIR)/media/openttd.32.xpm" "$(BUNDLE_DIR)/media/"
$(Q)cp "$(ROOT_DIR)/media/openttd.32.bmp" "$(BUNDLE_DIR)/media/"
ifeq ($(shell if test -n "`ls -l \"$(BIN_DIR)/scenario/\"*.scn 2> /dev/null`"; then echo 1; fi), 1)
$(Q)cp "$(BIN_DIR)/scenario/"*.scn "$(BUNDLE_DIR)/scenario/"
endif
ifeq ($(shell if test -n "`ls -l \"$(BIN_DIR)/scenario/heightmaps/\"* 2>/dev/null`"; then echo 1; fi), 1)
$(Q)cp "$(BIN_DIR)/scenario/heightmaps/"* "$(BUNDLE_DIR)/scenario/heightmap/"
endif
ifeq ($(TTD), openttd.exe)
$(Q)unix2dos "$(BUNDLE_DIR)/docs/"* "$(BUNDLE_DIR)/readme.txt" "$(BUNDLE_DIR)/COPYING"
endif
### Packing the current bundle into several compressed file formats ###
#
# Zips & dmgs do not contain a root folder, i.e. they have files in the root of the zip/dmg.
# gzip, bzip2 and lha archives have a root folder, with the same name as the bundle.
#
# One can supply a custom name by adding BUNDLE_NAME:=<name> to the make command.
#
bundle_zip: bundle
@echo '[BUNDLE] Creating $(BUNDLE_NAME).zip'
$(Q)mkdir -p "$(BUNDLES_DIR)"
$(Q)cd "$(BUNDLE_DIR)" && zip -r $(shell if test -z "$(VERBOSE)"; then echo '-q'; fi) "$(BUNDLES_DIR)/$(BUNDLE_NAME).zip" .
bundle_gzip: bundle
@echo '[BUNDLE] Creating $(BUNDLE_NAME).tar.gz'
$(Q)mkdir -p "$(BUNDLES_DIR)/.gzip/$(BUNDLE_NAME)"
$(Q)cp -R "$(BUNDLE_DIR)/"* "$(BUNDLES_DIR)/.gzip/$(BUNDLE_NAME)/"
$(Q)cd "$(BUNDLES_DIR)/.gzip" && tar -zc$(shell if test -n "$(VERBOSE)"; then echo 'v'; fi)f "$(BUNDLES_DIR)/$(BUNDLE_NAME).tar.gz" "$(BUNDLE_NAME)"
$(Q)rm -rf "$(BUNDLES_DIR)/.gzip"
bundle_bzip2: bundle
@echo '[BUNDLE] Creating $(BUNDLE_NAME).tar.bz2'
$(Q)mkdir -p "$(BUNDLES_DIR)/.bzip2/$(BUNDLE_NAME)"
$(Q)cp -R "$(BUNDLE_DIR)/"* "$(BUNDLES_DIR)/.bzip2/$(BUNDLE_NAME)/"
$(Q)cd "$(BUNDLES_DIR)/.bzip2" && tar -jc$(shell if test -n "$(VERBOSE)"; then echo 'v'; fi)f "$(BUNDLES_DIR)/$(BUNDLE_NAME).tar.bz2" "$(BUNDLE_NAME)"
$(Q)rm -rf "$(BUNDLES_DIR)/.bzip2"
bundle_lha: bundle
@echo '[BUNDLE] Creating $(BUNDLE_NAME).lha'
$(Q)mkdir -p "$(BUNDLES_DIR)/.lha/$(BUNDLE_NAME)"
$(Q)cp -R "$(BUNDLE_DIR)/"* "$(BUNDLES_DIR)/.lha/$(BUNDLE_NAME)/"
$(Q)cd "$(BUNDLES_DIR)/.lha" && lha ao6 "$(BUNDLES_DIR)/$(BUNDLE_NAME).lha" "$(BUNDLE_NAME)"
$(Q)rm -rf "$(BUNDLES_DIR)/.lha"
bundle_dmg: bundle
@echo '[BUNDLE] Creating $(BUNDLE_NAME).dmg'
$(Q)mkdir -p "$(BUNDLES_DIR)/OpenTTD $(REV)"
$(Q)cp -R "$(BUNDLE_DIR)/" "$(BUNDLES_DIR)/OpenTTD $(REV)"
$(Q)hdiutil create -ov -format UDZO -srcfolder "$(BUNDLES_DIR)/OpenTTD $(REV)" "$(BUNDLES_DIR)/$(BUNDLE_NAME).dmg"
$(Q)rm -fr "$(BUNDLES_DIR)/OpenTTD $(REV)"
ifdef OSXAPP
install:
@echo '[INSTALL] Cannot install the OSX Application Bundle'
else
install: bundle
@echo '[INSTALL] Installing OpenTTD'
$(Q)install -d "$(INSTALL_BINARY_DIR)"
$(Q)install -d "$(INSTALL_ICON_DIR)"
$(Q)install -d "$(INSTALL_DATA_DIR)/gm"
$(Q)install -d "$(INSTALL_DATA_DIR)/data"
$(Q)install -d "$(INSTALL_DATA_DIR)/lang"
$(Q)install -d "$(INSTALL_DATA_DIR)/docs"
$(Q)install -m 755 "$(BUNDLE_DIR)/$(TTD)" "$(INSTALL_BINARY_DIR)"
$(Q)install -m 644 "$(BUNDLE_DIR)/lang/"* "$(INSTALL_DATA_DIR)/lang"
$(Q)install -m 644 "$(BUNDLE_DIR)/data/"* "$(INSTALL_DATA_DIR)/data"
$(Q)install -m 644 "$(BUNDLE_DIR)/docs/"* "$(INSTALL_DATA_DIR)/docs"
$(Q)install -m 644 "$(BUNDLE_DIR)/media/"* "$(INSTALL_ICON_DIR)"
$(Q)cp -R "$(BUNDLE_DIR)/scenario" "$(INSTALL_DATA_DIR)"
endif # OSXAPP