/* $Id$ */
/** @file command.h */
#ifndef COMMAND_H
#define COMMAND_H
/**
* List of commands.
*
* This enum defines all possible commands which can be executed to the game
* engine. Observing the game like the query-tool or checking the profit of a
* vehicle don't result in a command which should be executed in the engine
* nor send to the server in a network game.
*
* @see _command_proc_table
*/
enum {
CMD_BUILD_RAILROAD_TRACK = 0, ///< build a rail track
CMD_REMOVE_RAILROAD_TRACK = 1, ///< remove a rail track
CMD_BUILD_SINGLE_RAIL = 2, ///< build a single rail track
CMD_REMOVE_SINGLE_RAIL = 3, ///< remove a single rail track
CMD_LANDSCAPE_CLEAR = 4, ///< demolish a tile
CMD_BUILD_BRIDGE = 5, ///< build a bridge
CMD_BUILD_RAILROAD_STATION = 6, ///< build a railroad station
CMD_BUILD_TRAIN_DEPOT = 7, ///< build a train depot
CMD_BUILD_SIGNALS = 8, ///< build a signal
CMD_REMOVE_SIGNALS = 9, ///< remove a signal
CMD_TERRAFORM_LAND = 10, ///< terraform a tile
CMD_PURCHASE_LAND_AREA = 11, ///< purchase a tile
CMD_SELL_LAND_AREA = 12, ///< sell a bought tile before
CMD_BUILD_TUNNEL = 13, ///< build a tunnel
CMD_REMOVE_FROM_RAILROAD_STATION = 14, ///< remove a tile station
CMD_CONVERT_RAIL = 15, ///< convert a rail type
CMD_BUILD_TRAIN_WAYPOINT = 16, ///< build a waypoint
CMD_RENAME_WAYPOINT = 17, ///< rename a waypoint
CMD_REMOVE_TRAIN_WAYPOINT = 18, ///< remove a waypoint
CMD_BUILD_ROAD_STOP = 21, ///< build a road stop
CMD_REMOVE_ROAD_STOP = 22, ///< remove a road stop
CMD_BUILD_LONG_ROAD = 23, ///< build a complete road (not a "half" one)
CMD_REMOVE_LONG_ROAD = 24, ///< remove a complete road (not a "half" one)
CMD_BUILD_ROAD = 25, ///< build a "half" road
CMD_REMOVE_ROAD = 26, ///< remove a "half" road
CMD_BUILD_ROAD_DEPOT = 27, ///< build a road depot
CMD_BUILD_AIRPORT = 29, ///< build an airport
CMD_BUILD_DOCK = 30, ///< build a dock
CMD_BUILD_SHIP_DEPOT = 31, ///< build a ship depot
CMD_BUILD_BUOY = 32, ///< build a buoy
CMD_PLANT_TREE = 33, ///< plant a tree
CMD_BUILD_RAIL_VEHICLE = 34, ///< build a rail vehicle
CMD_MOVE_RAIL_VEHICLE = 35, ///< move a rail vehicle (in the depot)
CMD_START_STOP_TRAIN = 36, ///< start or stop a train
CMD_SELL_RAIL_WAGON = 38, ///< sell a rail wagon
CMD_SEND_TRAIN_TO_DEPOT = 39, ///< send a train to a depot
CMD_FORCE_TRAIN_PROCEED = 40, ///< proceed a train to pass a red signal
CMD_REVERSE_TRAIN_DIRECTION = 41, ///< turn a train around
CMD_MODIFY_ORDER = 42, ///< modify an order (like set full-load)
CMD_SKIP_TO_ORDER = 43, ///< skip an order to the next of specific one
CMD_DELETE_ORDER = 44, ///< delete an order
CMD_INSERT_ORDER = 45, ///< insert a new order
CMD_CHANGE_SERVICE_INT = 46, ///< change the server interval of a vehicle
CMD_BUILD_INDUSTRY = 47, ///< build a new industry
CMD_BUILD_COMPANY_HQ = 48, ///< build the company headquarter
CMD_SET_PLAYER_FACE = 49, ///< set the face of the player/company
CMD_SET_PLAYER_COLOR = 50, ///< set the color of the player/company
CMD_INCREASE_LOAN = 51, ///< increase the loan from the bank
CMD_DECREASE_LOAN = 52, ///< decrease the loan from the bank
CMD_WANT_ENGINE_PREVIEW = 53, ///< confirm the preview of an engine
CMD_NAME_VEHICLE = 54, ///< rename a whole vehicle
CMD_RENAME_ENGINE = 55, ///< rename a engine (in the engine list)
CMD_CHANGE_COMPANY_NAME = 56, ///< change the company name
CMD_CHANGE_PRESIDENT_NAME = 57, ///< change the president name
CMD_RENAME_STATION = 58, ///< rename a station
CMD_SELL_AIRCRAFT = 59, ///< sell an aircraft
CMD_START_STOP_AIRCRAFT = 60, ///< start/stop an aircraft
CMD_BUILD_AIRCRAFT = 61, ///< build an aircraft
CMD_SEND_AIRCRAFT_TO_HANGAR = 62, ///< send an aircraft to a hanger
CMD_REFIT_AIRCRAFT = 64, ///< refit the cargo space of an aircraft
CMD_PLACE_SIGN = 65, ///< place a sign
CMD_RENAME_SIGN = 66, ///< rename a sign
CMD_BUILD_ROAD_VEH = 67, ///< build a road vehicle
CMD_START_STOP_ROADVEH = 68, ///< start/stop a road vehicle
CMD_SELL_ROAD_VEH = 69, ///< sell a road vehicle
CMD_SEND_ROADVEH_TO_DEPOT = 70, ///< send a road vehicle to the depot
CMD_TURN_ROADVEH = 71, ///< turn a road vehicle around
CMD_REFIT_ROAD_VEH = 72, ///< refit the cargo space of a road vehicle
CMD_PAUSE = 73, ///< pause the game
CMD_BUY_SHARE_IN_COMPANY = 74, ///< buy a share from a company
CMD_SELL_SHARE_IN_COMPANY = 75, ///< sell a share from a company
CMD_BUY_COMPANY = 76, ///< buy a company which is bankrupt
CMD_BUILD_TOWN = 77, ///< build a town
CMD_RENAME_TOWN = 80, ///< rename a town
CMD_DO_TOWN_ACTION = 81, ///< do a action from the town detail window (like advertises or bribe)
CMD_SET_ROAD_DRIVE_SIDE = 82, ///< set the side where the road vehicles drive
CMD_CHANGE_DIFFICULTY_LEVEL = 85, ///< change the difficult of a game (each setting for it own)
CMD_START_STOP_SHIP = 86, ///< start/stop a ship
CMD_SELL_SHIP = 87, ///< sell a ship
CMD_BUILD_SHIP = 88, ///< build a new ship
CMD_SEND_SHIP_TO_DEPOT = 89, ///< send a ship to a depot
CMD_REFIT_SHIP = 91, ///< refit the cargo space of a ship
CMD_ORDER_REFIT = 98, ///< change the refit informaction of an order (for "goto depot" )
CMD_CLONE_ORDER = 99, ///< clone (and share) an order
CMD_CLEAR_AREA = 100, ///< clear an area
CMD_MONEY_CHEAT = 102, ///< do the money cheat
CMD_BUILD_CANAL = 103, ///< build a canal
CMD_PLAYER_CTRL = 104, ///< used in multiplayer to create a new player etc.
CMD_LEVEL_LAND = 105, ///< level land
CMD_REFIT_RAIL_VEHICLE = 106, ///< refit the cargo space of a train
CMD_RESTORE_ORDER_INDEX = 107, ///< restore vehicle order-index and service interval
CMD_BUILD_LOCK = 108, ///< build a lock
CMD_BUILD_SIGNAL_TRACK = 110, ///< add signals along a track (by dragging)
CMD_REMOVE_SIGNAL_TRACK = 111, ///< remove signals along a track (by dragging)
CMD_GIVE_MONEY = 113, ///< give money to an other player
CMD_CHANGE_PATCH_SETTING = 114, ///< change a patch setting
CMD_SET_AUTOREPLACE = 115, ///< set an autoreplace entry
CMD_CLONE_VEHICLE = 116, ///< clone a vehicle
CMD_MASS_START_STOP = 117, ///< start/stop all vehicles (in a depot)
CMD_DEPOT_SELL_ALL_VEHICLES = 118, ///< sell all vehicles which are in a given depot
CMD_DEPOT_MASS_AUTOREPLACE = 119, ///< force the autoreplace to take action in a given depot
CMD_CREATE_GROUP = 120, ///< create a new group
CMD_DELETE_GROUP = 121, ///< delete a group
CMD_RENAME_GROUP = 122, ///< rename a group
CMD_ADD_VEHICLE_GROUP = 123, ///< add a vehicle to a group
CMD_ADD_SHARED_VEHICLE_GROUP = 124, ///< add all other shared vehicles to a group which are missing
CMD_REMOVE_ALL_VEHICLES_GROUP = 125, ///< remove all vehicles from a group
CMD_SET_GROUP_REPLACE_PROTECTION = 126, ///< set the autoreplace-protection for a group
CMD_MOVE_ORDER = 127, ///< move an order
CMD_CHANGE_TIMETABLE = 128, ///< change the timetable for a vehicle
CMD_SET_VEHICLE_ON_TIME = 129, ///< set the vehicle on time feature (timetable)
CMD_AUTOFILL_TIMETABLE = 130, ///< autofill the timetable
};
/**
* List of flags for a command.
*
* This enums defines some flags which can be used for the commands.
*/
enum {
DC_EXEC = 0x01, ///< execute the given command
DC_AUTO = 0x02, ///< don't allow building on structures
DC_QUERY_COST = 0x04, ///< query cost only, don't build.
DC_NO_WATER = 0x08, ///< don't allow building on water
DC_NO_RAIL_OVERLAP = 0x10, ///< don't allow overlap of rails (used in buildrail)
DC_AI_BUILDING = 0x20, ///< special building rules for AI
DC_NO_TOWN_RATING = 0x40, ///< town rating does not disallow you from building
DC_FORCETEST = 0x80, ///< force test too.
};
/**
* Used to combine a StringID with the command.
*
* This macro can be used to add a StringID (the error message to show) on a command-id
* (CMD_xxx). Use the binary or-operator "|" to combine the command with the result from
* this macro.
*
* @param x The StringID to combine with a command-id
*/
#define CMD_MSG(x) ((x) << 16)
/**
* Defines some flags.
*
* This enumeration defines some flags which are binary-or'ed on a command.
*/
enum {
CMD_NO_WATER = 0x0400, ///< dont build on water
CMD_NETWORK_COMMAND = 0x0800, ///< execute the command without sending it on the network
CMD_NO_TEST_IF_IN_NETWORK = 0x1000, ///< When enabled, the command will bypass the no-DC_EXEC round if in network
CMD_SHOW_NO_ERROR = 0x2000, ///< do not show the error message
};
/**
* Command flags for the command table _command_proc_table.
*
* This enumeration defines flags for the _command_proc_table.
*/
enum {
CMD_SERVER = 0x1, ///< the command can only be initiated by the server
CMD_OFFLINE = 0x2, ///< the command cannot be executed in a multiplayer game; single-player only
CMD_AUTO = 0x4, ///< set the DC_AUTO flag on this command
};
/**
* Defines the callback type for all command handler functions.
*
* This type defines the function header for all functions which handles a CMD_* command.
* A command handler use the parameters to act according to the meaning of the command.
* The tile parameter defines the tile to perform an action on.
* The flag parameter is filled with flags from the DC_* enumeration. The parameters
* p1 and p2 are filled with parameters for the command like "which road type", "which
* order" or "direction". Each function should mentioned in there doxygen comments
* the usage of these parameters.
*
* @param tile The tile to apply a command on
* @param flags Flags for the command, from the DC_* enumeration
* @param p1 Additional data for the command
* @param p2 Additional data for the command
* @return The CommandCost of the command, which can be succeeded or failed.
*/
typedef CommandCost CommandProc(TileIndex tile, uint32 flags, uint32 p1, uint32 p2);
/**
* Define a command with the flags which belongs to it.
*
* This struct connect a command handler function with the flags created with
* the #CMD_AUTO, #CMD_OFFLINE and #CMD_SERVER values.
*/
struct Command {
CommandProc *proc;
byte flags;
};
/**
* Checks if a command failes.
*
* As you see the parameter is not a command but the return value of a command,
* the CommandCost class. This function checks if the command executed by
* the CommandProc function failed and returns true if it does.
*
* @param cost The return value of a CommandProc call
* @return true if the command failes
* @see CmdSucceded
*/
static inline bool CmdFailed(CommandCost cost) { return cost.Failed(); }
/**
* Checks if a command succeeded.
*
* As #CmdFailed this function checks if a command succeeded
*
* @param cost The return value of a CommandProc call
* @return true if the command succeeded
* @see CmdSucceeded
*/
static inline bool CmdSucceeded(CommandCost cost) { return cost.Succeeded(); }
/**
* Define a default return value for a failed command.
*
* This variable contains a CommandCost object with is declared as "failed".
* Other functions just need to return this error if there is an error,
* which doesn't need to specific by a StringID.
*/
static const CommandCost CMD_ERROR = CommandCost(INVALID_STRING_ID);
/**
* Returns from a function with a specific StringID as error.
*
* This macro is used to return from a function. The parameter contains the
* StringID which will be returned.
*
* @param errcode The StringID to return
*/
#define return_cmd_error(errcode) return CommandCost(errcode);
/* command.cpp */
/**
* Define a callback function for the client, after the command is finished.
*
* Functions of this type are called after the command is finished. The parameters
* are from the #CommandProc callback type. The boolean parameter indicates if the
* command succeeded or failed.
*
* @param success If the command succeeded or not.
* @param tile The tile of the command action
* @param p1 Additional data of the command
* @param p1 Additional data of the command
* @see CommandProc
*/
typedef void CommandCallback(bool success, TileIndex tile, uint32 p1, uint32 p2);
/**
* Execute a command
*/
CommandCost DoCommand(TileIndex tile, uint32 p1, uint32 p2, uint32 flags, uint procc);
/**
* Execute a network safe DoCommand function
*/
bool DoCommandP(TileIndex tile, uint32 p1, uint32 p2, CommandCallback *callback, uint32 cmd, bool my_cmd = true);
#ifdef ENABLE_NETWORK
/**
* Send a command over the network
*/
void NetworkSend_Command(TileIndex tile, uint32 p1, uint32 p2, uint32 cmd, CommandCallback *callback);
#endif /* ENABLE_NETWORK */
/**
* Text, which gets sent with a command
*
* This variable contains a string (be specific a pointer of the first
* char of this string) which will be send with a command. This is
* used for user input data like names or chat messages.
*/
extern const char *_cmd_text;
/**
* Checks if a integer value belongs to a command.
*/
bool IsValidCommand(uint cmd);
/**
* Returns the flags from a given command.
*/
byte GetCommandFlags(uint cmd);
/**
* Returns the current money available which can be used for a command.
*/
Money GetAvailableMoneyForCommand();
#endif /* COMMAND_H */