(svn r9400) -Codechange: Use some more representative enum names for landscape types.
/* $Id$ */
#include "stdafx.h"
#include "openttd.h"
#include "bridge_map.h"
#include "bridge.h"
#include "cmd_helper.h"
#include "debug.h"
#include "functions.h"
#include "rail_map.h"
#include "road_map.h"
#include "table/sprites.h"
#include "table/strings.h"
#include "map.h"
#include "landscape.h"
#include "tile.h"
#include "town_map.h"
#include "tunnel_map.h"
#include "vehicle.h"
#include "viewport.h"
#include "command.h"
#include "pathfind.h"
#include "engine.h"
#include "town.h"
#include "sound.h"
#include "station.h"
#include "sprite.h"
#include "depot.h"
#include "waypoint.h"
#include "window.h"
#include "rail.h"
#include "railtypes.h" // include table for railtypes
#include "newgrf.h"
#include "yapf/yapf.h"
#include "newgrf_callbacks.h"
#include "newgrf_station.h"
#include "train.h"
const byte _track_sloped_sprites[14] = {
14, 15, 22, 13,
0, 21, 17, 12,
23, 0, 18, 20,
19, 16
};
/* 4
* ---------
* |\ /|
* | \ 1/ |
* | \ / |
* | \ / |
* 16| \ |32
* | / \2 |
* | / \ |
* | / \ |
* |/ \|
* ---------
* 8
*/
/* MAP2 byte: abcd???? => Signal On? Same coding as map3lo
* MAP3LO byte: abcd???? => Signal Exists?
* a and b are for diagonals, upper and left,
* one for each direction. (ie a == NE->SW, b ==
* SW->NE, or v.v., I don't know. b and c are
* similar for lower and right.
* MAP2 byte: ????abcd => Type of ground.
* MAP3LO byte: ????abcd => Type of rail.
* MAP5: 00abcdef => rail
* 01abcdef => rail w/ signals
* 10uuuuuu => unused
* 11uuuudd => rail depot
*/
static bool CheckTrackCombination(TileIndex tile, TrackBits to_build, uint flags)
{
TrackBits current; /* The current track layout */
TrackBits future; /* The track layout we want to build */
_error_message = STR_1001_IMPOSSIBLE_TRACK_COMBINATION;
if (!IsPlainRailTile(tile)) return false;
/* So, we have a tile with tracks on it (and possibly signals). Let's see
* what tracks first */
current = GetTrackBits(tile);
future = current | to_build;
/* Are we really building something new? */
if (current == future) {
/* Nothing new is being built */
_error_message = STR_1007_ALREADY_BUILT;
return false;
}
/* Let's see if we may build this */
if (flags & DC_NO_RAIL_OVERLAP || HasSignals(tile)) {
/* If we are not allowed to overlap (flag is on for ai players or we have
* signals on the tile), check that */
return future == TRACK_BIT_HORZ || future == TRACK_BIT_VERT;
} else {
/* Normally, we may overlap and any combination is valid */
return true;
}
}
static const TrackBits _valid_tileh_slopes[][15] = {
// set of normal ones
{
TRACK_BIT_ALL,
TRACK_BIT_RIGHT,
TRACK_BIT_UPPER,
TRACK_BIT_X,
TRACK_BIT_LEFT,
TRACK_BIT_NONE,
TRACK_BIT_Y,
TRACK_BIT_LOWER,
TRACK_BIT_LOWER,
TRACK_BIT_Y,
TRACK_BIT_NONE,
TRACK_BIT_LEFT,
TRACK_BIT_X,
TRACK_BIT_UPPER,
TRACK_BIT_RIGHT,
},
// allowed rail for an evenly raised platform
{
TRACK_BIT_NONE,
TRACK_BIT_LEFT,
TRACK_BIT_LOWER,
TRACK_BIT_Y | TRACK_BIT_LOWER | TRACK_BIT_LEFT,
TRACK_BIT_RIGHT,
TRACK_BIT_ALL,
TRACK_BIT_X | TRACK_BIT_LOWER | TRACK_BIT_RIGHT,
TRACK_BIT_ALL,
TRACK_BIT_UPPER,
TRACK_BIT_X | TRACK_BIT_UPPER | TRACK_BIT_LEFT,
TRACK_BIT_ALL,
TRACK_BIT_ALL,
TRACK_BIT_Y | TRACK_BIT_UPPER | TRACK_BIT_RIGHT,
TRACK_BIT_ALL,
TRACK_BIT_ALL
}
};
uint GetRailFoundation(Slope tileh, TrackBits bits)
{
uint i;
if (!IsSteepSlope(tileh)) {
if ((~_valid_tileh_slopes[0][tileh] & bits) == 0) return 0;
if ((~_valid_tileh_slopes[1][tileh] & bits) == 0) return tileh;
}
switch (bits) {
default: NOT_REACHED();
case TRACK_BIT_X: i = 0; break;
case TRACK_BIT_Y: i = 1; break;
case TRACK_BIT_LEFT: return 15 + 8 + (tileh == SLOPE_STEEP_W ? 4 : 0);
case TRACK_BIT_LOWER: return 15 + 8 + (tileh == SLOPE_STEEP_S ? 5 : 1);
case TRACK_BIT_RIGHT: return 15 + 8 + (tileh == SLOPE_STEEP_E ? 6 : 2);
case TRACK_BIT_UPPER: return 15 + 8 + (tileh == SLOPE_STEEP_N ? 7 : 3);
}
switch (tileh) {
case SLOPE_W:
case SLOPE_STEEP_W: i += 0; break;
case SLOPE_S:
case SLOPE_STEEP_S: i += 2; break;
case SLOPE_E:
case SLOPE_STEEP_E: i += 4; break;
case SLOPE_N:
case SLOPE_STEEP_N: i += 6; break;
default: return 0;
}
return i + 15;
}
static uint32 CheckRailSlope(Slope tileh, TrackBits rail_bits, TrackBits existing, TileIndex tile)
{
if (IsSteepSlope(tileh)) {
if (existing == 0) {
TrackBits valid = TRACK_BIT_CROSS | (HASBIT(1 << SLOPE_STEEP_W | 1 << SLOPE_STEEP_E, tileh) ? TRACK_BIT_VERT : TRACK_BIT_HORZ);
if (valid & rail_bits) return _price.terraform;
}
} else {
rail_bits |= existing;
// don't allow building on the lower side of a coast
if (IsTileType(tile, MP_WATER) &&
~_valid_tileh_slopes[1][tileh] & rail_bits) {
return_cmd_error(STR_3807_CAN_T_BUILD_ON_WATER);
}
// no special foundation
if ((~_valid_tileh_slopes[0][tileh] & rail_bits) == 0)
return 0;
if ((~_valid_tileh_slopes[1][tileh] & rail_bits) == 0 || ( // whole tile is leveled up
(rail_bits == TRACK_BIT_X || rail_bits == TRACK_BIT_Y) &&
(tileh == SLOPE_W || tileh == SLOPE_S || tileh == SLOPE_E || tileh == SLOPE_N)
)) { // partly up
if (existing != 0) {
return 0;
} else if (!_patches.build_on_slopes || _is_old_ai_player) {
return_cmd_error(STR_1000_LAND_SLOPED_IN_WRONG_DIRECTION);
} else {
return _price.terraform;
}
}
}
return_cmd_error(STR_1000_LAND_SLOPED_IN_WRONG_DIRECTION);
}
/* Validate functions for rail building */
static inline bool ValParamTrackOrientation(Track track) {return IsValidTrack(track);}
/** Build a single piece of rail
* @param tile tile to build on
* @param p1 railtype of being built piece (normal, mono, maglev)
* @param p2 rail track to build
*/
int32 CmdBuildSingleRail(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
Slope tileh;
RailType railtype;
Track track;
TrackBits trackbit;
int32 cost = 0;
int32 ret;
if (!ValParamRailtype(p1) || !ValParamTrackOrientation((Track)p2)) return CMD_ERROR;
railtype = (RailType)p1;
track = (Track)p2;
tileh = GetTileSlope(tile, NULL);
trackbit = TrackToTrackBits(track);
SET_EXPENSES_TYPE(EXPENSES_CONSTRUCTION);
switch (GetTileType(tile)) {
case MP_RAILWAY:
if (!CheckTrackCombination(tile, trackbit, flags) ||
!EnsureNoVehicle(tile)) {
return CMD_ERROR;
}
if (!IsTileOwner(tile, _current_player) ||
!IsCompatibleRail(GetRailType(tile), railtype)) {
// Get detailed error message
return DoCommand(tile, 0, 0, flags, CMD_LANDSCAPE_CLEAR);
}
ret = CheckRailSlope(tileh, trackbit, GetTrackBits(tile), tile);
if (CmdFailed(ret)) return ret;
cost += ret;
/* If the rail types don't match, try to convert only if engines of
* the present rail type are powered on the new rail type. */
if (GetRailType(tile) != railtype && HasPowerOnRail(GetRailType(tile), railtype)) {
ret = DoCommand(tile, tile, railtype, flags, CMD_CONVERT_RAIL);
if (CmdFailed(ret)) return ret;
cost += ret;
}
if (flags & DC_EXEC) {
SetRailGroundType(tile, RAIL_GROUND_BARREN);
SetTrackBits(tile, GetTrackBits(tile) | trackbit);
}
break;
case MP_STREET:
#define M(x) (1 << (x))
/* Level crossings may only be built on these slopes */
if (!HASBIT(M(SLOPE_SEN) | M(SLOPE_ENW) | M(SLOPE_NWS) | M(SLOPE_NS) | M(SLOPE_WSE) | M(SLOPE_EW) | M(SLOPE_FLAT), tileh)) {
return_cmd_error(STR_1000_LAND_SLOPED_IN_WRONG_DIRECTION);
}
#undef M
if (!EnsureNoVehicle(tile)) return CMD_ERROR;
if (GetRoadTileType(tile) == ROAD_TILE_NORMAL) {
if (HasRoadWorks(tile)) return_cmd_error(STR_ROAD_WORKS_IN_PROGRESS);
if ((track == TRACK_X && GetRoadBits(tile) == ROAD_Y) ||
(track == TRACK_Y && GetRoadBits(tile) == ROAD_X)) {
if (flags & DC_EXEC) {
MakeRoadCrossing(tile, GetTileOwner(tile), _current_player, (track == TRACK_X ? AXIS_Y : AXIS_X), railtype, GetTownIndex(tile));
}
break;
}
}
if (IsLevelCrossing(tile) && GetCrossingRailBits(tile) == trackbit) {
return_cmd_error(STR_1007_ALREADY_BUILT);
}
/* FALLTHROUGH */
default:
ret = CheckRailSlope(tileh, trackbit, TRACK_BIT_NONE, tile);
if (CmdFailed(ret)) return ret;
cost += ret;
ret = DoCommand(tile, 0, 0, flags, CMD_LANDSCAPE_CLEAR);
if (CmdFailed(ret)) return ret;
cost += ret;
if (flags & DC_EXEC) MakeRailNormal(tile, _current_player, trackbit, railtype);
break;
}
if (flags & DC_EXEC) {
MarkTileDirtyByTile(tile);
SetSignalsOnBothDir(tile, track);
YapfNotifyTrackLayoutChange(tile, track);
}
return cost + _price.build_rail;
}
/** Remove a single piece of track
* @param tile tile to remove track from
* @param p1 unused
* @param p2 rail orientation
*/
int32 CmdRemoveSingleRail(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
Track track = (Track)p2;
TrackBits trackbit;
int32 cost = _price.remove_rail;
bool crossing = false;
if (!ValParamTrackOrientation((Track)p2)) return CMD_ERROR;
trackbit = TrackToTrackBits(track);
SET_EXPENSES_TYPE(EXPENSES_CONSTRUCTION);
switch (GetTileType(tile)) {
case MP_STREET: {
if (!IsLevelCrossing(tile) ||
GetCrossingRailBits(tile) != trackbit ||
(_current_player != OWNER_WATER && !CheckTileOwnership(tile)) ||
!EnsureNoVehicle(tile)) {
return CMD_ERROR;
}
if (flags & DC_EXEC) {
MakeRoadNormal(tile, GetCrossingRoadOwner(tile), GetCrossingRoadBits(tile), GetTownIndex(tile));
}
break;
}
case MP_RAILWAY: {
TrackBits present;
if (!IsPlainRailTile(tile) ||
(_current_player != OWNER_WATER && !CheckTileOwnership(tile)) ||
!EnsureNoVehicle(tile)) {
return CMD_ERROR;
}
present = GetTrackBits(tile);
if ((present & trackbit) == 0) return CMD_ERROR;
if (present == (TRACK_BIT_X | TRACK_BIT_Y)) crossing = true;
/* Charge extra to remove signals on the track, if they are there */
if (HasSignalOnTrack(tile, track))
cost += DoCommand(tile, track, 0, flags, CMD_REMOVE_SIGNALS);
if (flags & DC_EXEC) {
present ^= trackbit;
if (present == 0) {
DoClearSquare(tile);
} else {
SetTrackBits(tile, present);
}
}
break;
}
default: return CMD_ERROR;
}
if (flags & DC_EXEC) {
MarkTileDirtyByTile(tile);
if (crossing) {
/* crossing is set when only TRACK_BIT_X and TRACK_BIT_Y are set. As we
* are removing one of these pieces, we'll need to update signals for
* both directions explicitly, as after the track is removed it won't
* 'connect' with the other piece. */
SetSignalsOnBothDir(tile, TRACK_X);
SetSignalsOnBothDir(tile, TRACK_Y);
YapfNotifyTrackLayoutChange(tile, TRACK_X);
YapfNotifyTrackLayoutChange(tile, TRACK_Y);
} else {
SetSignalsOnBothDir(tile, track);
YapfNotifyTrackLayoutChange(tile, track);
}
}
return cost;
}
static const TileIndexDiffC _trackdelta[] = {
{ -1, 0 }, { 0, 1 }, { -1, 0 }, { 0, 1 }, { 1, 0 }, { 0, 1 },
{ 0, 0 },
{ 0, 0 },
{ 1, 0 }, { 0, -1 }, { 0, -1 }, { 1, 0 }, { 0, -1 }, { -1, 0 },
{ 0, 0 },
{ 0, 0 }
};
static int32 ValidateAutoDrag(Trackdir *trackdir, TileIndex start, TileIndex end)
{
int x = TileX(start);
int y = TileY(start);
int ex = TileX(end);
int ey = TileY(end);
int dx, dy, trdx, trdy;
if (!ValParamTrackOrientation(TrackdirToTrack(*trackdir))) return CMD_ERROR;
// calculate delta x,y from start to end tile
dx = ex - x;
dy = ey - y;
// calculate delta x,y for the first direction
trdx = _trackdelta[*trackdir].x;
trdy = _trackdelta[*trackdir].y;
if (!IsDiagonalTrackdir(*trackdir)) {
trdx += _trackdelta[*trackdir ^ 1].x;
trdy += _trackdelta[*trackdir ^ 1].y;
}
// validate the direction
while (
(trdx <= 0 && dx > 0) ||
(trdx >= 0 && dx < 0) ||
(trdy <= 0 && dy > 0) ||
(trdy >= 0 && dy < 0)
) {
if (!HASBIT(*trackdir, 3)) { // first direction is invalid, try the other
SetBitT(*trackdir, 3); // reverse the direction
trdx = -trdx;
trdy = -trdy;
} else { // other direction is invalid too, invalid drag
return CMD_ERROR;
}
}
// (for diagonal tracks, this is already made sure of by above test), but:
// for non-diagonal tracks, check if the start and end tile are on 1 line
if (!IsDiagonalTrackdir(*trackdir)) {
trdx = _trackdelta[*trackdir].x;
trdy = _trackdelta[*trackdir].y;
if (abs(dx) != abs(dy) && abs(dx) + abs(trdy) != abs(dy) + abs(trdx))
return CMD_ERROR;
}
return 0;
}
/** Build a stretch of railroad tracks.
* @param tile start tile of drag
* @param p1 end tile of drag
* @param p2 various bitstuffed elements
* - p2 = (bit 0-3) - railroad type normal/maglev (0 = normal, 1 = mono, 2 = maglev)
* - p2 = (bit 4-6) - track-orientation, valid values: 0-5 (Track enum)
* - p2 = (bit 7) - 0 = build, 1 = remove tracks
*/
static int32 CmdRailTrackHelper(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
int32 ret, total_cost = 0;
Track track = (Track)GB(p2, 4, 3);
Trackdir trackdir;
byte mode = HASBIT(p2, 7);
RailType railtype = (RailType)GB(p2, 0, 4);
TileIndex end_tile;
if (!ValParamRailtype(railtype) || !ValParamTrackOrientation(track)) return CMD_ERROR;
if (p1 >= MapSize()) return CMD_ERROR;
end_tile = p1;
trackdir = TrackToTrackdir(track);
SET_EXPENSES_TYPE(EXPENSES_CONSTRUCTION);
if (CmdFailed(ValidateAutoDrag(&trackdir, tile, end_tile))) return CMD_ERROR;
if (flags & DC_EXEC) SndPlayTileFx(SND_20_SPLAT_2, tile);
for (;;) {
ret = DoCommand(tile, railtype, TrackdirToTrack(trackdir), flags, (mode == 0) ? CMD_BUILD_SINGLE_RAIL : CMD_REMOVE_SINGLE_RAIL);
if (CmdFailed(ret)) {
if ((_error_message != STR_1007_ALREADY_BUILT) && (mode == 0)) break;
_error_message = INVALID_STRING_ID;
} else {
total_cost += ret;
}
if (tile == end_tile) break;
tile += ToTileIndexDiff(_trackdelta[trackdir]);
// toggle railbit for the non-diagonal tracks
if (!IsDiagonalTrackdir(trackdir)) ToggleBitT(trackdir, 0);
}
return (total_cost == 0) ? CMD_ERROR : total_cost;
}
/** Build rail on a stretch of track.
* Stub for the unified rail builder/remover
* @see CmdRailTrackHelper
*/
int32 CmdBuildRailroadTrack(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
return CmdRailTrackHelper(tile, flags, p1, CLRBIT(p2, 7));
}
/** Build rail on a stretch of track.
* Stub for the unified rail builder/remover
* @see CmdRailTrackHelper
*/
int32 CmdRemoveRailroadTrack(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
return CmdRailTrackHelper(tile, flags, p1, SETBIT(p2, 7));
}
/** Build a train depot
* @param tile position of the train depot
* @param p1 rail type
* @param p2 bit 0..1 entrance direction (DiagDirection)
*
* @todo When checking for the tile slope,
* distingush between "Flat land required" and "land sloped in wrong direction"
*/
int32 CmdBuildTrainDepot(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
Depot *d;
int32 cost, ret;
Slope tileh;
SET_EXPENSES_TYPE(EXPENSES_CONSTRUCTION);
/* check railtype and valid direction for depot (0 through 3), 4 in total */
if (!ValParamRailtype(p1)) return CMD_ERROR;
tileh = GetTileSlope(tile, NULL);
DiagDirection dir = Extract<DiagDirection, 0>(p2);
/* Prohibit construction if
* The tile is non-flat AND
* 1) The AI is "old-school"
* 2) build-on-slopes is disabled
* 3) the tile is steep i.e. spans two height levels
* 4) the exit points in the wrong direction
*/
if (tileh != SLOPE_FLAT && (
_is_old_ai_player ||
!_patches.build_on_slopes ||
IsSteepSlope(tileh) ||
!CanBuildDepotByTileh(dir, tileh)
)) {
return_cmd_error(STR_0007_FLAT_LAND_REQUIRED);
}
ret = DoCommand(tile, 0, 0, flags, CMD_LANDSCAPE_CLEAR);
if (CmdFailed(ret)) return CMD_ERROR;
cost = ret;
if (MayHaveBridgeAbove(tile) && IsBridgeAbove(tile)) return_cmd_error(STR_5007_MUST_DEMOLISH_BRIDGE_FIRST);
d = AllocateDepot();
if (d == NULL) return CMD_ERROR;
if (flags & DC_EXEC) {
MakeRailDepot(tile, _current_player, dir, (RailType)p1);
MarkTileDirtyByTile(tile);
d->xy = tile;
d->town_index = ClosestTownFromTile(tile, (uint)-1)->index;
UpdateSignalsOnSegment(tile, dir);
YapfNotifyTrackLayoutChange(tile, TrackdirToTrack(DiagdirToDiagTrackdir(dir)));
}
return cost + _price.build_train_depot;
}
/** Build signals, alternate between double/single, signal/semaphore,
* pre/exit/combo-signals, and what-else not. If the rail piece does not
* have any signals, bit 4 (cycle signal-type) is ignored
* @param tile tile where to build the signals
* @param p1 various bitstuffed elements
* - p1 = (bit 0-2) - track-orientation, valid values: 0-5 (Track enum)
* - p1 = (bit 3) - 1 = override signal/semaphore, or pre/exit/combo signal (CTRL-toggle)
* - p1 = (bit 4) - 0 = signals, 1 = semaphores
* @param p2 used for CmdBuildManySignals() to copy direction of first signal
* TODO: p2 should be replaced by two bits for "along" and "against" the track.
*/
int32 CmdBuildSingleSignal(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
Track track = (Track)GB(p1, 0, 3);
bool pre_signal = HASBIT(p1, 3);
SignalVariant sigvar = (pre_signal ^ HASBIT(p1, 4)) ? SIG_SEMAPHORE : SIG_ELECTRIC;
int32 cost;
if (!ValParamTrackOrientation(track) || !IsTileType(tile, MP_RAILWAY) || !EnsureNoVehicle(tile))
return CMD_ERROR;
/* Protect against invalid signal copying */
if (p2 != 0 && (p2 & SignalOnTrack(track)) == 0) return CMD_ERROR;
/* You can only build signals on plain rail tiles, and the selected track must exist */
if (!IsPlainRailTile(tile) || !HasTrack(tile, track)) return CMD_ERROR;
if (!CheckTileOwnership(tile)) return CMD_ERROR;
_error_message = STR_1005_NO_SUITABLE_RAILROAD_TRACK;
{
/* See if this is a valid track combination for signals, (ie, no overlap) */
TrackBits trackbits = GetTrackBits(tile);
if (KILL_FIRST_BIT(trackbits) != 0 && /* More than one track present */
trackbits != TRACK_BIT_HORZ &&
trackbits != TRACK_BIT_VERT) {
return CMD_ERROR;
}
}
SET_EXPENSES_TYPE(EXPENSES_CONSTRUCTION);
if (!HasSignalOnTrack(tile, track)) {
// build new signals
cost = _price.build_signals;
} else {
if (p2 != 0 && sigvar != GetSignalVariant(tile)) {
// convert signals <-> semaphores
cost = _price.build_signals + _price.remove_signals;
} else {
// it is free to change orientation/pre-exit-combo signals
cost = 0;
}
}
if (flags & DC_EXEC) {
if (!HasSignals(tile)) {
// there are no signals at all on this tile yet
SetHasSignals(tile, true);
_m[tile].m2 |= 0xF0; // all signals are on
_m[tile].m3 &= ~0xF0; // no signals built by default
SetSignalType(tile, SIGTYPE_NORMAL);
SetSignalVariant(tile, sigvar);
}
if (p2 == 0) {
if (!HasSignalOnTrack(tile, track)) {
// build new signals
_m[tile].m3 |= SignalOnTrack(track);
} else {
if (pre_signal) {
// cycle between normal -> pre -> exit -> combo -> ...
SignalType type = GetSignalType(tile);
SetSignalType(tile, type == SIGTYPE_COMBO ? SIGTYPE_NORMAL : (SignalType)(type + 1));
} else {
CycleSignalSide(tile, track);
}
}
} else {
/* If CmdBuildManySignals is called with copying signals, just copy the
* direction of the first signal given as parameter by CmdBuildManySignals */
_m[tile].m3 &= ~SignalOnTrack(track);
_m[tile].m3 |= p2 & SignalOnTrack(track);
SetSignalVariant(tile, sigvar);
}
MarkTileDirtyByTile(tile);
SetSignalsOnBothDir(tile, track);
YapfNotifyTrackLayoutChange(tile, track);
}
return cost;
}
/** Build many signals by dragging; AutoSignals
* @param tile start tile of drag
* @param p1 end tile of drag
* @param p2 various bitstuffed elements
* - p2 = (bit 0- 2) - track-orientation, valid values: 0-5 (Track enum)
* - p2 = (bit 3) - 1 = override signal/semaphore, or pre/exit/combo signal (CTRL-toggle)
* - p2 = (bit 4) - 0 = signals, 1 = semaphores
* - p2 = (bit 5) - 0 = build, 1 = remove signals
* - p2 = (bit 24-31) - user defined signals_density
*/
static int32 CmdSignalTrackHelper(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
int32 ret, total_cost, signal_ctr;
byte signals;
bool error = true;
TileIndex end_tile;
Track track = (Track)GB(p2, 0, 3);
bool mode = HASBIT(p2, 3);
bool semaphores = HASBIT(p2, 4);
bool remove = HASBIT(p2, 5);
Trackdir trackdir = TrackToTrackdir(track);
byte signal_density = GB(p2, 24, 8);
if (p1 >= MapSize()) return CMD_ERROR;
end_tile = p1;
if (signal_density == 0 || signal_density > 20) return CMD_ERROR;
if (!IsTileType(tile, MP_RAILWAY)) return CMD_ERROR;
SET_EXPENSES_TYPE(EXPENSES_CONSTRUCTION);
/* for vertical/horizontal tracks, double the given signals density
* since the original amount will be too dense (shorter tracks) */
if (!IsDiagonalTrack(track)) signal_density *= 2;
if (CmdFailed(ValidateAutoDrag(&trackdir, tile, end_tile))) return CMD_ERROR;
track = TrackdirToTrack(trackdir); /* trackdir might have changed, keep track in sync */
// copy the signal-style of the first rail-piece if existing
if (HasSignals(tile)) {
signals = _m[tile].m3 & SignalOnTrack(track);
if (signals == 0) signals = SignalOnTrack(track); /* Can this actually occur? */
// copy signal/semaphores style (independent of CTRL)
semaphores = GetSignalVariant(tile) != SIG_ELECTRIC;
} else { // no signals exist, drag a two-way signal stretch
signals = SignalOnTrack(track);
}
/* signal_ctr - amount of tiles already processed
* signals_density - patch setting to put signal on every Nth tile (double space on |, -- tracks)
**********
* trackdir - trackdir to build with autorail
* semaphores - semaphores or signals
* signals - is there a signal/semaphore on the first tile, copy its style (two-way/single-way)
* and convert all others to semaphore/signal
* remove - 1 remove signals, 0 build signals */
signal_ctr = total_cost = 0;
for (;;) {
// only build/remove signals with the specified density
if (signal_ctr % signal_density == 0) {
uint32 p1 = GB(TrackdirToTrack(trackdir), 0, 3);
SB(p1, 3, 1, mode);
SB(p1, 4, 1, semaphores);
ret = DoCommand(tile, p1, signals, flags, remove ? CMD_REMOVE_SIGNALS : CMD_BUILD_SIGNALS);
/* Be user-friendly and try placing signals as much as possible */
if (!CmdFailed(ret)) {
error = false;
total_cost += ret;
}
}
if (tile == end_tile) break;
tile += ToTileIndexDiff(_trackdelta[trackdir]);
signal_ctr++;
// toggle railbit for the non-diagonal tracks (|, -- tracks)
if (!IsDiagonalTrackdir(trackdir)) ToggleBitT(trackdir, 0);
}
return error ? CMD_ERROR : total_cost;
}
/** Build signals on a stretch of track.
* Stub for the unified signal builder/remover
* @see CmdSignalTrackHelper
*/
int32 CmdBuildSignalTrack(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
return CmdSignalTrackHelper(tile, flags, p1, p2);
}
/** Remove signals
* @param tile coordinates where signal is being deleted from
* @param various bitstuffed elements, only track information is used
* - p1 = (bit 0- 2) - track-orientation, valid values: 0-5 (Track enum)
* - p1 = (bit 3) - override signal/semaphore, or pre/exit/combo signal (CTRL-toggle)
* - p1 = (bit 4) - 0 = signals, 1 = semaphores
*/
int32 CmdRemoveSingleSignal(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
Track track = (Track)GB(p1, 0, 3);
if (!ValParamTrackOrientation(track) ||
!IsTileType(tile, MP_RAILWAY) ||
!EnsureNoVehicle(tile) ||
!HasSignalOnTrack(tile, track)) {
return CMD_ERROR;
}
/* Only water can remove signals from anyone */
if (_current_player != OWNER_WATER && !CheckTileOwnership(tile)) return CMD_ERROR;
SET_EXPENSES_TYPE(EXPENSES_CONSTRUCTION);
/* Do it? */
if (flags & DC_EXEC) {
_m[tile].m3 &= ~SignalOnTrack(track);
/* removed last signal from tile? */
if (GB(_m[tile].m3, 4, 4) == 0) {
SB(_m[tile].m2, 4, 4, 0);
SetHasSignals(tile, false);
SetSignalVariant(tile, SIG_ELECTRIC); // remove any possible semaphores
}
SetSignalsOnBothDir(tile, track);
YapfNotifyTrackLayoutChange(tile, track);
MarkTileDirtyByTile(tile);
}
return _price.remove_signals;
}
/** Remove signals on a stretch of track.
* Stub for the unified signal builder/remover
* @see CmdSignalTrackHelper
*/
int32 CmdRemoveSignalTrack(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
return CmdSignalTrackHelper(tile, flags, p1, SETBIT(p2, 5)); // bit 5 is remove bit
}
typedef int32 DoConvertRailProc(TileIndex tile, RailType totype, bool exec);
static int32 DoConvertRail(TileIndex tile, RailType totype, bool exec)
{
if (!CheckTileOwnership(tile)) return CMD_ERROR;
if (!EnsureNoVehicle(tile) && (!IsCompatibleRail(GetRailType(tile), totype) || IsPlainRailTile(tile))) return CMD_ERROR;
// tile is already of requested type?
if (GetRailType(tile) == totype) return CMD_ERROR;
// 'hidden' elrails can't be downgraded to normal rail when elrails are disabled
if (_patches.disable_elrails && totype == RAILTYPE_RAIL && GetRailType(tile) == RAILTYPE_ELECTRIC) return CMD_ERROR;
// change type.
if (exec) {
SetRailType(tile, totype);
MarkTileDirtyByTile(tile);
// notify YAPF about the track layout change
TrackBits tracks = GetTrackBits(tile);
while (tracks != TRACK_BIT_NONE) {
YapfNotifyTrackLayoutChange(tile, RemoveFirstTrack(&tracks));
}
if (IsTileDepotType(tile, TRANSPORT_RAIL)) {
Vehicle *v;
/* Update build vehicle window related to this depot */
InvalidateWindowData(WC_BUILD_VEHICLE, tile);
/* update power of trains in this depot */
FOR_ALL_VEHICLES(v) {
if (v->type == VEH_TRAIN && IsFrontEngine(v) && v->tile == tile && v->u.rail.track == 0x80) {
TrainPowerChanged(v);
}
}
}
}
return _price.build_rail / 2;
}
extern int32 DoConvertStationRail(TileIndex tile, RailType totype, bool exec);
extern int32 DoConvertStreetRail(TileIndex tile, RailType totype, bool exec);
extern int32 DoConvertTunnelBridgeRail(TileIndex tile, RailType totype, bool exec);
/** Convert one rail type to the other. You can convert normal rail to
* monorail/maglev easily or vice-versa.
* @param tile end tile of rail conversion drag
* @param p1 start tile of drag
* @param p2 new railtype to convert to
*/
int32 CmdConvertRail(TileIndex tile, uint32 flags, uint32 p1, uint32 p2)
{
int32 ret, cost, money;
int ex;
int ey;
int sx, sy, x, y;
SET_EXPENSES_TYPE(EXPENSES_CONSTRUCTION);
if (!ValParamRailtype(p2)) return CMD_ERROR;
if (p1 >= MapSize()) return CMD_ERROR;
// make sure sx,sy are smaller than ex,ey
ex = TileX(tile);
ey = TileY(tile);
sx = TileX(p1);
sy = TileY(p1);
if (ex < sx) Swap(ex, sx);
if (ey < sy) Swap(ey, sy);
money = GetAvailableMoneyForCommand();
cost = 0;
ret = 0;
for (x = sx; x <= ex; ++x) {
for (y = sy; y <= ey; ++y) {
TileIndex tile = TileXY(x, y);
DoConvertRailProc* proc;
switch (GetTileType(tile)) {
case MP_RAILWAY: proc = DoConvertRail; break;
case MP_STATION: proc = DoConvertStationRail; break;
case MP_STREET: proc = DoConvertStreetRail; break;
case MP_TUNNELBRIDGE: proc = DoConvertTunnelBridgeRail; break;
default: continue;
}
ret = proc(tile, (RailType)p2, false);
if (CmdFailed(ret)) continue;
cost += ret;
if (flags & DC_EXEC) {
money -= ret;
if (money < 0) {
_additional_cash_required = ret;
return cost - ret;
}
proc(tile, (RailType)p2, true);
}
}
}
return (cost == 0) ? ret : cost;
}
static int32 RemoveTrainDepot(TileIndex tile, uint32 flags)
{
if (!CheckTileOwnership(tile) && _current_player != OWNER_WATER)
return CMD_ERROR;
if (!EnsureNoVehicle(tile))
return CMD_ERROR;
if (flags & DC_EXEC) {
DiagDirection dir = GetRailDepotDirection(tile);
DeleteDepot(GetDepotByTile(tile));
UpdateSignalsOnSegment(tile, dir);
YapfNotifyTrackLayoutChange(tile, TrackdirToTrack(DiagdirToDiagTrackdir(dir)));
}
return _price.remove_train_depot;
}
static int32 ClearTile_Track(TileIndex tile, byte flags)
{
int32 cost;
int32 ret;
if (flags & DC_AUTO) {
if (!IsTileOwner(tile, _current_player))
return_cmd_error(STR_1024_AREA_IS_OWNED_BY_ANOTHER);
if (IsPlainRailTile(tile)) {
return_cmd_error(STR_1008_MUST_REMOVE_RAILROAD_TRACK);
} else {
return_cmd_error(STR_2004_BUILDING_MUST_BE_DEMOLISHED);
}
}
cost = 0;
switch (GetRailTileType(tile)) {
case RAIL_TILE_SIGNALS:
case RAIL_TILE_NORMAL: {
TrackBits tracks = GetTrackBits(tile);
while (tracks != TRACK_BIT_NONE) {
Track track = RemoveFirstTrack(&tracks);
ret = DoCommand(tile, 0, track, flags, CMD_REMOVE_SINGLE_RAIL);
if (CmdFailed(ret)) return CMD_ERROR;
cost += ret;
}
return cost;
}
case RAIL_TILE_DEPOT:
return RemoveTrainDepot(tile, flags);
case RAIL_TILE_WAYPOINT:
return RemoveTrainWaypoint(tile, flags, false);
default:
return CMD_ERROR;
}
}
#include "table/track_land.h"
static void DrawSingleSignal(TileIndex tile, byte condition, uint image, uint pos)
{
bool side = (_opt.road_side != 0) && _patches.signal_side;
static const Point SignalPositions[2][12] = {
{ /* Signals on the left side */
/* LEFT LEFT RIGHT RIGHT UPPER UPPER */
{ 8, 5}, {14, 1}, { 1, 14}, { 9, 11}, { 1, 0}, { 3, 10},
/* LOWER LOWER X X Y Y */
{11, 4}, {14, 14}, {11, 3}, { 4, 13}, { 3, 4}, {11, 13}
}, { /* Signals on the right side */
/* LEFT LEFT RIGHT RIGHT UPPER UPPER */
{14, 1}, {12, 10}, { 4, 6}, { 1, 14}, {10, 4}, { 0, 1},
/* LOWER LOWER X X Y Y */
{14, 14}, { 5, 12}, {11, 13}, { 4, 3}, {13, 4}, { 3, 11}
}
};
static const SpriteID SignalBase[2][2][4] = {
{ /* Signals on left side */
{ 0x4FB, 0x1323, 0x1333, 0x1343}, /* light signals */
{ 0x1353, 0x1363, 0x1373, 0x1383} /* semaphores */
}, { /* Signals on right side */
{ 0x4FB, 0x1323, 0x1333, 0x1343}, /* light signals */
{ 0x1446, 0x1456, 0x1466, 0x1476} /* semaphores */
/* | | | | */
/* normal, entry, exit, combo */
}
};
uint x = TileX(tile) * TILE_SIZE + SignalPositions[side][pos].x;
uint y = TileY(tile) * TILE_SIZE + SignalPositions[side][pos].y;
SpriteID sprite;
/* _signal_base is set by our NewGRF Action 5 loader. If it is 0 then we
* just draw the standard signals, else we get the offset from _signal_base
* and draw that sprite. All the signal sprites are loaded sequentially. */
if (_signal_base == 0 || (GetSignalType(tile) == 0 && GetSignalVariant(tile) == SIG_ELECTRIC)) {
sprite = SignalBase[side][GetSignalVariant(tile)][GetSignalType(tile)] + image + condition;
} else {
sprite = _signal_base + (GetSignalType(tile) - 1) * 16 + GetSignalVariant(tile) * 64 + image + condition;
}
AddSortableSpriteToDraw(sprite, PAL_NONE, x, y, 1, 1, 10, GetSlopeZ(x,y));
}
static uint32 _drawtile_track_palette;
static void DrawTrackFence_NW(const TileInfo *ti)
{
SpriteID image = 0x515;
if (ti->tileh != SLOPE_FLAT) image = (ti->tileh & SLOPE_S) ? 0x519 : 0x51B;
AddSortableSpriteToDraw(image, _drawtile_track_palette,
ti->x, ti->y + 1, 16, 1, 4, ti->z);
}
static void DrawTrackFence_SE(const TileInfo *ti)
{
SpriteID image = 0x515;
if (ti->tileh != SLOPE_FLAT) image = (ti->tileh & SLOPE_S) ? 0x519 : 0x51B;
AddSortableSpriteToDraw(image, _drawtile_track_palette,
ti->x, ti->y + TILE_SIZE - 1, 16, 1, 4, ti->z);
}
static void DrawTrackFence_NW_SE(const TileInfo *ti)
{
DrawTrackFence_NW(ti);
DrawTrackFence_SE(ti);
}
static void DrawTrackFence_NE(const TileInfo *ti)
{
SpriteID image = 0x516;
if (ti->tileh != SLOPE_FLAT) image = (ti->tileh & SLOPE_S) ? 0x51A : 0x51C;
AddSortableSpriteToDraw(image, _drawtile_track_palette,
ti->x + 1, ti->y, 1, 16, 4, ti->z);
}
static void DrawTrackFence_SW(const TileInfo *ti)
{
SpriteID image = 0x516;
if (ti->tileh != SLOPE_FLAT) image = (ti->tileh & SLOPE_S) ? 0x51A : 0x51C;
AddSortableSpriteToDraw(image, _drawtile_track_palette,
ti->x + TILE_SIZE - 1, ti->y, 1, 16, 4, ti->z);
}
static void DrawTrackFence_NE_SW(const TileInfo *ti)
{
DrawTrackFence_NE(ti);
DrawTrackFence_SW(ti);
}
static void DrawTrackFence_NS_1(const TileInfo *ti)
{
int z = ti->z;
if (ti->tileh & SLOPE_W) z += TILE_HEIGHT;
AddSortableSpriteToDraw(0x517, _drawtile_track_palette,
ti->x + TILE_SIZE / 2, ti->y + TILE_SIZE / 2, 1, 1, 4, z);
}
static void DrawTrackFence_NS_2(const TileInfo *ti)
{
int z = ti->z;
if (ti->tileh & SLOPE_E) z += TILE_HEIGHT;
AddSortableSpriteToDraw(0x517, _drawtile_track_palette,
ti->x + TILE_SIZE / 2, ti->y + TILE_SIZE / 2, 1, 1, 4, z);
}
static void DrawTrackFence_WE_1(const TileInfo *ti)
{
int z = ti->z;
if (ti->tileh & SLOPE_N) z += TILE_HEIGHT;
AddSortableSpriteToDraw(0x518, _drawtile_track_palette,
ti->x + TILE_SIZE / 2, ti->y + TILE_SIZE / 2, 1, 1, 4, z);
}
static void DrawTrackFence_WE_2(const TileInfo *ti)
{
int z = ti->z;
if (ti->tileh & SLOPE_S) z += TILE_HEIGHT;
AddSortableSpriteToDraw(0x518, _drawtile_track_palette,
ti->x + TILE_SIZE / 2, ti->y + TILE_SIZE / 2, 1, 1, 4, z);
}
static void DrawTrackDetails(const TileInfo* ti)
{
switch (GetRailGroundType(ti->tile)) {
case RAIL_GROUND_FENCE_NW: DrawTrackFence_NW(ti); break;
case RAIL_GROUND_FENCE_SE: DrawTrackFence_SE(ti); break;
case RAIL_GROUND_FENCE_SENW: DrawTrackFence_NW_SE(ti); break;
case RAIL_GROUND_FENCE_NE: DrawTrackFence_NE(ti); break;
case RAIL_GROUND_FENCE_SW: DrawTrackFence_SW(ti); break;
case RAIL_GROUND_FENCE_NESW: DrawTrackFence_NE_SW(ti); break;
case RAIL_GROUND_FENCE_VERT1: DrawTrackFence_NS_1(ti); break;
case RAIL_GROUND_FENCE_VERT2: DrawTrackFence_NS_2(ti); break;
case RAIL_GROUND_FENCE_HORIZ1: DrawTrackFence_WE_1(ti); break;
case RAIL_GROUND_FENCE_HORIZ2: DrawTrackFence_WE_2(ti); break;
default: break;
}
}
/**
* Draw ground sprite and track bits
* @param ti TileInfo
* @param track TrackBits to draw
* @param earth Draw as earth
* @param snow Draw as snow
* @param flat Always draw foundation
*/
static void DrawTrackBits(TileInfo* ti, TrackBits track)
{
const RailtypeInfo *rti = GetRailTypeInfo(GetRailType(ti->tile));
SpriteID image;
SpriteID pal = PAL_NONE;
bool junction = false;
// Select the sprite to use.
(image = rti->base_sprites.track_y, track == TRACK_BIT_Y) ||
(image++, track == TRACK_BIT_X) ||
(image++, track == TRACK_BIT_UPPER) ||
(image++, track == TRACK_BIT_LOWER) ||
(image++, track == TRACK_BIT_RIGHT) ||
(image++, track == TRACK_BIT_LEFT) ||
(image++, track == TRACK_BIT_CROSS) ||
(image = rti->base_sprites.track_ns, track == TRACK_BIT_HORZ) ||
(image++, track == TRACK_BIT_VERT) ||
(junction = true, false) ||
(image = rti->base_sprites.ground, (track & TRACK_BIT_3WAY_NE) == 0) ||
(image++, (track & TRACK_BIT_3WAY_SW) == 0) ||
(image++, (track & TRACK_BIT_3WAY_NW) == 0) ||
(image++, (track & TRACK_BIT_3WAY_SE) == 0) ||
(image++, true);
if (ti->tileh != SLOPE_FLAT) {
uint foundation = GetRailFoundation(ti->tileh, track);
if (foundation != 0) DrawFoundation(ti, foundation);
// DrawFoundation() modifies ti.
// Default sloped sprites..
if (ti->tileh != SLOPE_FLAT)
image = _track_sloped_sprites[ti->tileh - 1] + rti->base_sprites.track_y;
}
switch (GetRailGroundType(ti->tile)) {
case RAIL_GROUND_BARREN: pal = PALETTE_TO_BARE_LAND; break;
case RAIL_GROUND_ICE_DESERT: image += rti->snow_offset; break;
default: break;
}
DrawGroundSprite(image, pal);
// Draw track pieces individually for junction tiles
if (junction) {
if (track & TRACK_BIT_X) DrawGroundSprite(rti->base_sprites.single_y, PAL_NONE);
if (track & TRACK_BIT_Y) DrawGroundSprite(rti->base_sprites.single_x, PAL_NONE);
if (track & TRACK_BIT_UPPER) DrawGroundSprite(rti->base_sprites.single_n, PAL_NONE);
if (track & TRACK_BIT_LOWER) DrawGroundSprite(rti->base_sprites.single_s, PAL_NONE);
if (track & TRACK_BIT_LEFT) DrawGroundSprite(rti->base_sprites.single_w, PAL_NONE);
if (track & TRACK_BIT_RIGHT) DrawGroundSprite(rti->base_sprites.single_e, PAL_NONE);
}
if (GetRailType(ti->tile) == RAILTYPE_ELECTRIC) DrawCatenary(ti);
}
static void DrawSignals(TileIndex tile, TrackBits rails)
{
#define MAYBE_DRAW_SIGNAL(x,y,z) if (IsSignalPresent(tile, x)) DrawSingleSignal(tile, GetSingleSignalState(tile, x), y - 0x4FB, z)
if (!(rails & TRACK_BIT_Y)) {
if (!(rails & TRACK_BIT_X)) {
if (rails & TRACK_BIT_LEFT) {
MAYBE_DRAW_SIGNAL(2, 0x509, 0);
MAYBE_DRAW_SIGNAL(3, 0x507, 1);
}
if (rails & TRACK_BIT_RIGHT) {
MAYBE_DRAW_SIGNAL(0, 0x509, 2);
MAYBE_DRAW_SIGNAL(1, 0x507, 3);
}
if (rails & TRACK_BIT_UPPER) {
MAYBE_DRAW_SIGNAL(3, 0x505, 4);
MAYBE_DRAW_SIGNAL(2, 0x503, 5);
}
if (rails & TRACK_BIT_LOWER) {
MAYBE_DRAW_SIGNAL(1, 0x505, 6);
MAYBE_DRAW_SIGNAL(0, 0x503, 7);
}
} else {
MAYBE_DRAW_SIGNAL(3, 0x4FB, 8);
MAYBE_DRAW_SIGNAL(2, 0x4FD, 9);
}
} else {
MAYBE_DRAW_SIGNAL(3, 0x4FF, 10);
MAYBE_DRAW_SIGNAL(2, 0x501, 11);
}
}
static void DrawTile_Track(TileInfo *ti)
{
const RailtypeInfo *rti = GetRailTypeInfo(GetRailType(ti->tile));
SpriteID image;
_drawtile_track_palette = PLAYER_SPRITE_COLOR(GetTileOwner(ti->tile));
if (IsPlainRailTile(ti->tile)) {
TrackBits rails = GetTrackBits(ti->tile);
DrawTrackBits(ti, rails);
if (_display_opt & DO_FULL_DETAIL) DrawTrackDetails(ti);
if (HasSignals(ti->tile)) DrawSignals(ti->tile, rails);
} else {
// draw depot/waypoint
const DrawTileSprites* dts;
const DrawTileSeqStruct* dtss;
uint32 relocation;
if (ti->tileh != SLOPE_FLAT) DrawFoundation(ti, ti->tileh);
if (IsRailDepot(ti->tile)) {
dts = &_depot_gfx_table[GetRailDepotDirection(ti->tile)];
relocation = rti->total_offset;
image = dts->ground_sprite;
if (image != SPR_FLAT_GRASS_TILE) image += rti->total_offset;
// adjust ground tile for desert
// don't adjust for snow, because snow in depots looks weird
if (IsSnowRailGround(ti->tile) && _opt.landscape == LT_TROPIC) {
if (image != SPR_FLAT_GRASS_TILE) {
image += rti->snow_offset; // tile with tracks
} else {
image = SPR_FLAT_SNOWY_TILE; // flat ground
}
}
} else {
// look for customization
byte stat_id = GetWaypointByTile(ti->tile)->stat_id;
const StationSpec *statspec = GetCustomStationSpec(STAT_CLASS_WAYP, stat_id);
if (statspec != NULL) {
// emulate station tile - open with building
const Station* st = ComposeWaypointStation(ti->tile);
uint gfx = 2;
if (HASBIT(statspec->callbackmask, CBM_CUSTOM_LAYOUT)) {
uint16 callback = GetStationCallback(CBID_STATION_SPRITE_LAYOUT, 0, 0, statspec, st, ti->tile);
if (callback != CALLBACK_FAILED) gfx = callback;
}
if (statspec->renderdata == NULL) {
dts = GetStationTileLayout(gfx);
} else {
dts = &statspec->renderdata[(gfx < statspec->tiles ? gfx : 0) + GetWaypointAxis(ti->tile)];
}
if (dts != NULL && dts->seq != NULL) {
relocation = GetCustomStationRelocation(statspec, st, ti->tile);
image = dts->ground_sprite;
if (HASBIT(image, SPRITE_MODIFIER_USE_OFFSET)) {
image += GetCustomStationGroundRelocation(statspec, st, ti->tile);
image += rti->custom_ground_offset;
} else {
image += rti->total_offset;
}
} else {
goto default_waypoint;
}
} else {
default_waypoint:
// There is no custom layout, fall back to the default graphics
dts = &_waypoint_gfx_table[GetWaypointAxis(ti->tile)];
relocation = 0;
image = dts->ground_sprite + rti->total_offset;
if (IsSnowRailGround(ti->tile)) image += rti->snow_offset;
}
}
DrawGroundSprite(image, PAL_NONE);
if (GetRailType(ti->tile) == RAILTYPE_ELECTRIC) DrawCatenary(ti);
foreach_draw_tile_seq(dtss, dts->seq) {
SpriteID image = dtss->image;
SpriteID pal;
/* Unlike stations, our default waypoint has no variation for
* different railtype, so don't use the railtype offset if
* no relocation is set */
if (HASBIT(image, SPRITE_MODIFIER_USE_OFFSET)) {
image += rti->total_offset;
} else {
image += relocation;
}
if (_display_opt & DO_TRANS_BUILDINGS) {
SETBIT(image, PALETTE_MODIFIER_TRANSPARENT);
pal = PALETTE_TO_TRANSPARENT;
} else if (HASBIT(image, PALETTE_MODIFIER_COLOR)) {
pal = _drawtile_track_palette;
} else {
pal = dtss->pal;
}
if ((byte)dtss->delta_z != 0x80) {
AddSortableSpriteToDraw(
image, pal,
ti->x + dtss->delta_x, ti->y + dtss->delta_y,
dtss->size_x, dtss->size_y,
dtss->size_z, ti->z + dtss->delta_z
);
} else {
AddChildSpriteScreen(image, pal, dtss->delta_x, dtss->delta_y);
}
}
}
DrawBridgeMiddle(ti);
}
static void DrawTileSequence(int x, int y, SpriteID ground, const DrawTileSeqStruct* dtss, uint32 offset)
{
SpriteID palette = PLAYER_SPRITE_COLOR(_local_player);
DrawSprite(ground, PAL_NONE, x, y);
for (; dtss->image != 0; dtss++) {
Point pt = RemapCoords(dtss->delta_x, dtss->delta_y, dtss->delta_z);
SpriteID image = dtss->image + offset;
DrawSprite(image, HASBIT(image, PALETTE_MODIFIER_COLOR) ? palette : PAL_NONE, x + pt.x, y + pt.y);
}
}
void DrawTrainDepotSprite(int x, int y, int dir, RailType railtype)
{
const DrawTileSprites* dts = &_depot_gfx_table[dir];
SpriteID image = dts->ground_sprite;
uint32 offset = GetRailTypeInfo(railtype)->total_offset;
if (image != SPR_FLAT_GRASS_TILE) image += offset;
DrawTileSequence(x + 33, y + 17, image, dts->seq, offset);
}
void DrawDefaultWaypointSprite(int x, int y, RailType railtype)
{
uint32 offset = GetRailTypeInfo(railtype)->total_offset;
const DrawTileSprites* dts = &_waypoint_gfx_table[AXIS_X];
DrawTileSequence(x, y, dts->ground_sprite + offset, dts->seq, 0);
}
struct SetSignalsData {
int cur;
int cur_stack;
bool stop;
bool has_presignal;
// presignal info
int presignal_exits;
int presignal_exits_free;
// these are used to keep track of the signals that change.
TrackdirByte bit[NUM_SSD_ENTRY];
TileIndex tile[NUM_SSD_ENTRY];
// these are used to keep track of the stack that modifies presignals recursively
TileIndex next_tile[NUM_SSD_STACK];
DiagDirectionByte next_dir[NUM_SSD_STACK];
};
static bool SetSignalsEnumProc(TileIndex tile, void* data, Trackdir trackdir, uint length, byte* state)
{
SetSignalsData* ssd = (SetSignalsData*)data;
if (!IsTileType(tile, MP_RAILWAY)) return false;
// the tile has signals?
if (HasSignalOnTrack(tile, TrackdirToTrack(trackdir))) {
if (HasSignalOnTrackdir(tile, ReverseTrackdir(trackdir))) {
// yes, add the signal to the list of signals
if (ssd->cur != NUM_SSD_ENTRY) {
ssd->tile[ssd->cur] = tile; // remember the tile index
ssd->bit[ssd->cur] = trackdir; // and the controlling bit number
ssd->cur++;
}
// remember if this block has a presignal.
ssd->has_presignal |= IsPresignalEntry(tile);
}
if (HasSignalOnTrackdir(tile, trackdir) && IsPresignalExit(tile)) {
// this is an exit signal that points out from the segment
ssd->presignal_exits++;
if (GetSignalStateByTrackdir(tile, trackdir) != SIGNAL_STATE_RED)
ssd->presignal_exits_free++;
}
return true;
} else if (IsTileDepotType(tile, TRANSPORT_RAIL)) {
return true; // don't look further if the tile is a depot
}
return false;
}
/* Struct to parse data from VehicleFromPos to SignalVehicleCheckProc */
struct SignalVehicleCheckStruct {
TileIndex tile;
uint track;
};
static void *SignalVehicleCheckProc(Vehicle *v, void *data)
{
const SignalVehicleCheckStruct* dest = (SignalVehicleCheckStruct*)data;
if (v->type != VEH_TRAIN) return NULL;
/* Wrong tile, or no train? Not a match */
if (v->tile != dest->tile) return NULL;
/* Are we on the same piece of track? */
if (dest->track & v->u.rail.track * 0x101) return v;
return NULL;
}
/* Special check for SetSignalsAfterProc, to see if there is a vehicle on this tile */
static bool SignalVehicleCheck(TileIndex tile, uint track)
{
SignalVehicleCheckStruct dest;
dest.tile = tile;
dest.track = track;
/* Locate vehicles in tunnels or on bridges */
if (IsTunnelTile(tile) || IsBridgeTile(tile)) {
TileIndex end;
DiagDirection direction;
if (IsTunnelTile(tile)) {
end = GetOtherTunnelEnd(tile);
direction = GetTunnelDirection(tile);
} else {
end = GetOtherBridgeEnd(tile);
direction = GetBridgeRampDirection(tile);
}
dest.track = 1 << (direction & 1); // get the trackbit the vehicle would have if it has not entered the tunnel yet (ie is still visible)
// check for a vehicle with that trackdir on the start tile of the tunnel
if (VehicleFromPos(tile, &dest, SignalVehicleCheckProc) != NULL) return true;
// check for a vehicle with that trackdir on the end tile of the tunnel
if (VehicleFromPos(end, &dest, SignalVehicleCheckProc) != NULL) return true;
// now check all tiles from start to end for a warping vehicle
// NOTE: the hashes for tiles may overlap, so this could maybe be optimised a bit by not checking every tile?
dest.track = 0x40; //Vehicle inside a tunnel or on a bridge
for (; tile != end; tile += TileOffsByDiagDir(direction)) {
if (VehicleFromPos(tile, &dest, SignalVehicleCheckProc) != NULL)
return true;
}
// no vehicle found
return false;
}
return VehicleFromPos(tile, &dest, SignalVehicleCheckProc) != NULL;
}
static void SetSignalsAfterProc(TrackPathFinder *tpf)
{
SetSignalsData *ssd = (SetSignalsData*)tpf->userdata;
const TrackPathFinderLink* link;
uint offs;
uint i;
ssd->stop = false;
/* Go through all the PF tiles */
for (i = 0; i < lengthof(tpf->hash_head); i++) {
/* Empty hash item */
if (tpf->hash_head[i] == 0) continue;
/* If 0x8000 is not set, there is only 1 item */
if (!(tpf->hash_head[i] & 0x8000)) {
/* Check if there is a vehicle on this tile */
if (SignalVehicleCheck(tpf->hash_tile[i], tpf->hash_head[i])) {
ssd->stop = true;
return;
}
} else {
/* There are multiple items, where hash_tile points to the first item in the list */
offs = tpf->hash_tile[i];
do {
/* Find the next item */
link = PATHFIND_GET_LINK_PTR(tpf, offs);
/* Check if there is a vehicle on this tile */
if (SignalVehicleCheck(link->tile, link->flags)) {
ssd->stop = true;
return;
}
/* Goto the next item */
} while ((offs = link->next) != 0xFFFF);
}
}
}
static const DiagDirection _dir_from_track[14] = {
DIAGDIR_NE, DIAGDIR_SE, DIAGDIR_NE, DIAGDIR_SE, DIAGDIR_SW, DIAGDIR_SE, DIAGDIR_NE, DIAGDIR_NE,
DIAGDIR_SW, DIAGDIR_NW, DIAGDIR_NW, DIAGDIR_SW, DIAGDIR_NW, DIAGDIR_NE,
};
static void ChangeSignalStates(SetSignalsData *ssd)
{
int i;
// thinking about presignals...
// the presignal is green if,
// if no train is in the segment AND
// there is at least one green exit signal OR
// there are no exit signals in the segment
// then mark the signals in the segment accordingly
for (i = 0; i != ssd->cur; i++) {
TileIndex tile = ssd->tile[i];
byte bit = SignalAgainstTrackdir(ssd->bit[i]);
uint16 m2 = _m[tile].m2;
// presignals don't turn green if there is at least one presignal exit and none are free
if (IsPresignalEntry(tile)) {
int ex = ssd->presignal_exits, exfree = ssd->presignal_exits_free;
// subtract for dual combo signals so they don't count themselves
if (IsPresignalExit(tile) && HasSignalOnTrackdir(tile, ssd->bit[i])) {
ex--;
if (GetSignalStateByTrackdir(tile, ssd->bit[i]) != SIGNAL_STATE_RED) exfree--;
}
// if we have exits and none are free, make red.
if (ex && !exfree) goto make_red;
}
// check if the signal is unaffected.
if (ssd->stop) {
make_red:
// turn red
if ((bit & m2) == 0) continue;
} else {
// turn green
if ((bit & m2) != 0) continue;
}
/* Update signals on the other side of this exit-combo signal; it changed. */
if (IsPresignalExit(tile)) {
if (ssd->cur_stack != NUM_SSD_STACK) {
ssd->next_tile[ssd->cur_stack] = tile;
ssd->next_dir[ssd->cur_stack] = _dir_from_track[ssd->bit[i]];
ssd->cur_stack++;
} else {
DEBUG(misc, 0, "NUM_SSD_STACK too small"); /// @todo WTF is this???
}
}
// it changed, so toggle it
_m[tile].m2 = m2 ^ bit;
MarkTileDirtyByTile(tile);
}
}
bool UpdateSignalsOnSegment(TileIndex tile, DiagDirection direction)
{
SetSignalsData ssd;
int result = -1;
ssd.cur_stack = 0;
for (;;) {
// go through one segment and update all signals pointing into that segment.
ssd.cur = ssd.presignal_exits = ssd.presignal_exits_free = 0;
ssd.has_presignal = false;
FollowTrack(tile, 0xC000 | TRANSPORT_RAIL, direction, SetSignalsEnumProc, SetSignalsAfterProc, &ssd);
ChangeSignalStates(&ssd);
// remember the result only for the first iteration.
if (result < 0) {
// stay in depot while segment is occupied or while all presignal exits are blocked
result = ssd.stop || (ssd.presignal_exits > 0 && ssd.presignal_exits_free == 0);
}
// if any exit signals were changed, we need to keep going to modify the stuff behind those.
if (ssd.cur_stack == 0) break;
// one or more exit signals were changed, so we need to update another segment too.
tile = ssd.next_tile[--ssd.cur_stack];
direction = ssd.next_dir[ssd.cur_stack];
}
return result != 0;
}
void SetSignalsOnBothDir(TileIndex tile, byte track)
{
static const DiagDirection _search_dir_1[] = {
DIAGDIR_NE, DIAGDIR_SE, DIAGDIR_NE, DIAGDIR_SE, DIAGDIR_SW, DIAGDIR_SE
};
static const DiagDirection _search_dir_2[] = {
DIAGDIR_SW, DIAGDIR_NW, DIAGDIR_NW, DIAGDIR_SW, DIAGDIR_NW, DIAGDIR_NE
};
UpdateSignalsOnSegment(tile, _search_dir_1[track]);
UpdateSignalsOnSegment(tile, _search_dir_2[track]);
}
static uint GetSlopeZ_Track(TileIndex tile, uint x, uint y)
{
uint z;
Slope tileh = GetTileSlope(tile, &z);
if (tileh == SLOPE_FLAT) return z;
if (IsPlainRailTile(tile)) {
uint f = GetRailFoundation(tileh, GetTrackBits(tile));
if (f != 0) {
if (IsSteepSlope(tileh)) {
z += TILE_HEIGHT;
} else if (f < 15) {
return z + TILE_HEIGHT; // leveled foundation
}
tileh = _inclined_tileh[f - 15]; // inclined foundation
}
return z + GetPartialZ(x & 0xF, y & 0xF, tileh);
} else {
return z + TILE_HEIGHT;
}
}
static Slope GetSlopeTileh_Track(TileIndex tile, Slope tileh)
{
if (tileh == SLOPE_FLAT) return SLOPE_FLAT;
if (IsPlainRailTile(tile)) {
uint f = GetRailFoundation(tileh, GetTrackBits(tile));
if (f == 0) return tileh;
if (f < 15) return SLOPE_FLAT; // leveled foundation
return _inclined_tileh[f - 15]; // inclined foundation
} else {
return SLOPE_FLAT;
}
}
static void GetAcceptedCargo_Track(TileIndex tile, AcceptedCargo ac)
{
/* not used */
}
static void AnimateTile_Track(TileIndex tile)
{
/* not used */
}
static void TileLoop_Track(TileIndex tile)
{
RailGroundType old_ground = GetRailGroundType(tile);
RailGroundType new_ground;
switch (_opt.landscape) {
case LT_ARCTIC:
if (GetTileZ(tile) > GetSnowLine()) {
new_ground = RAIL_GROUND_ICE_DESERT;
goto set_ground;
}
break;
case LT_TROPIC:
if (GetTropicZone(tile) == TROPICZONE_DESERT) {
new_ground = RAIL_GROUND_ICE_DESERT;
goto set_ground;
}
break;
}
if (!IsPlainRailTile(tile)) return;
new_ground = RAIL_GROUND_GRASS;
if (old_ground != RAIL_GROUND_BARREN) { /* wait until bottom is green */
/* determine direction of fence */
TrackBits rail = GetTrackBits(tile);
switch (rail) {
case TRACK_BIT_UPPER: new_ground = RAIL_GROUND_FENCE_HORIZ1; break;
case TRACK_BIT_LOWER: new_ground = RAIL_GROUND_FENCE_HORIZ2; break;
case TRACK_BIT_LEFT: new_ground = RAIL_GROUND_FENCE_VERT1; break;
case TRACK_BIT_RIGHT: new_ground = RAIL_GROUND_FENCE_VERT2; break;
default: {
PlayerID owner = GetTileOwner(tile);
if (rail == (TRACK_BIT_LOWER | TRACK_BIT_RIGHT) || (
(rail & TRACK_BIT_3WAY_NW) == 0 &&
(rail & TRACK_BIT_X)
)) {
TileIndex n = tile + TileDiffXY(0, -1);
TrackBits nrail = GetTrackBits(n);
if (!IsTileType(n, MP_RAILWAY) ||
!IsTileOwner(n, owner) ||
nrail == TRACK_BIT_UPPER ||
nrail == TRACK_BIT_LEFT) {
new_ground = RAIL_GROUND_FENCE_NW;
}
}
if (rail == (TRACK_BIT_UPPER | TRACK_BIT_LEFT) || (
(rail & TRACK_BIT_3WAY_SE) == 0 &&
(rail & TRACK_BIT_X)
)) {
TileIndex n = tile + TileDiffXY(0, 1);
TrackBits nrail = GetTrackBits(n);
if (!IsTileType(n, MP_RAILWAY) ||
!IsTileOwner(n, owner) ||
nrail == TRACK_BIT_LOWER ||
nrail == TRACK_BIT_RIGHT) {
new_ground = (new_ground == RAIL_GROUND_FENCE_NW) ?
RAIL_GROUND_FENCE_SENW : RAIL_GROUND_FENCE_SE;
}
}
if (rail == (TRACK_BIT_LOWER | TRACK_BIT_LEFT) || (
(rail & TRACK_BIT_3WAY_NE) == 0 &&
(rail & TRACK_BIT_Y)
)) {
TileIndex n = tile + TileDiffXY(-1, 0);
TrackBits nrail = GetTrackBits(n);
if (!IsTileType(n, MP_RAILWAY) ||
!IsTileOwner(n, owner) ||
nrail == TRACK_BIT_UPPER ||
nrail == TRACK_BIT_RIGHT) {
new_ground = RAIL_GROUND_FENCE_NE;
}
}
if (rail == (TRACK_BIT_UPPER | TRACK_BIT_RIGHT) || (
(rail & TRACK_BIT_3WAY_SW) == 0 &&
(rail & TRACK_BIT_Y)
)) {
TileIndex n = tile + TileDiffXY(1, 0);
TrackBits nrail = GetTrackBits(n);
if (!IsTileType(n, MP_RAILWAY) ||
!IsTileOwner(n, owner) ||
nrail == TRACK_BIT_LOWER ||
nrail == TRACK_BIT_LEFT) {
new_ground = (new_ground == RAIL_GROUND_FENCE_NE) ?
RAIL_GROUND_FENCE_NESW : RAIL_GROUND_FENCE_SW;
}
}
break;
}
}
}
set_ground:
if (old_ground != new_ground) {
SetRailGroundType(tile, new_ground);
MarkTileDirtyByTile(tile);
}
}
static uint32 GetTileTrackStatus_Track(TileIndex tile, TransportType mode)
{
if (mode != TRANSPORT_RAIL) return 0;
switch (GetRailTileType(tile)) {
default: NOT_REACHED();
case RAIL_TILE_NORMAL: {
TrackBits rails = GetTrackBits(tile);
uint32 ret = rails * 0x101;
return (rails == TRACK_BIT_CROSS) ? ret | 0x40 : ret;
}
case RAIL_TILE_SIGNALS: {
uint32 ret = GetTrackBits(tile) * 0x101;
byte a;
uint16 b;
a = _m[tile].m3;
b = _m[tile].m2;
b &= a;
/* When signals are not present (in neither
* direction), we pretend them to be green. (So if
* signals are only one way, the other way will
* implicitely become `red' */
if ((a & 0xC0) == 0) b |= 0xC0;
if ((a & 0x30) == 0) b |= 0x30;
if ((b & 0x80) == 0) ret |= 0x10070000;
if ((b & 0x40) == 0) ret |= 0x07100000;
if ((b & 0x20) == 0) ret |= 0x20080000;
if ((b & 0x10) == 0) ret |= 0x08200000;
return ret;
}
case RAIL_TILE_DEPOT: return AxisToTrackBits(DiagDirToAxis(GetRailDepotDirection(tile))) * 0x101;
case RAIL_TILE_WAYPOINT: return GetRailWaypointBits(tile) * 0x101;
}
}
static void ClickTile_Track(TileIndex tile)
{
switch (GetRailTileType(tile)) {
case RAIL_TILE_DEPOT: ShowDepotWindow(tile, VEH_TRAIN); break;
case RAIL_TILE_WAYPOINT: ShowRenameWaypointWindow(GetWaypointByTile(tile)); break;
default: break;
}
}
static void GetTileDesc_Track(TileIndex tile, TileDesc *td)
{
td->owner = GetTileOwner(tile);
switch (GetRailTileType(tile)) {
case RAIL_TILE_NORMAL:
td->str = STR_1021_RAILROAD_TRACK;
break;
case RAIL_TILE_SIGNALS: {
const StringID signal_type[] = {
STR_RAILROAD_TRACK_WITH_NORMAL_SIGNALS,
STR_RAILROAD_TRACK_WITH_PRESIGNALS,
STR_RAILROAD_TRACK_WITH_EXITSIGNALS,
STR_RAILROAD_TRACK_WITH_COMBOSIGNALS
};
td->str = signal_type[GetSignalType(tile)];
break;
}
case RAIL_TILE_DEPOT:
td->str = STR_1023_RAILROAD_TRAIN_DEPOT;
break;
case RAIL_TILE_WAYPOINT:
default:
td->str = STR_LANDINFO_WAYPOINT;
break;
}
}
static void ChangeTileOwner_Track(TileIndex tile, PlayerID old_player, PlayerID new_player)
{
if (!IsTileOwner(tile, old_player)) return;
if (new_player != PLAYER_SPECTATOR) {
SetTileOwner(tile, new_player);
} else {
DoCommand(tile, 0, 0, DC_EXEC, CMD_LANDSCAPE_CLEAR);
}
}
static const byte _fractcoords_behind[4] = { 0x8F, 0x8, 0x80, 0xF8 };
static const byte _fractcoords_enter[4] = { 0x8A, 0x48, 0x84, 0xA8 };
static const signed char _deltacoord_leaveoffset[8] = {
-1, 0, 1, 0, /* x */
0, 1, 0, -1 /* y */
};
static uint32 VehicleEnter_Track(Vehicle *v, TileIndex tile, int x, int y)
{
byte fract_coord;
byte fract_coord_leave;
DiagDirection dir;
int length;
// this routine applies only to trains in depot tiles
if (v->type != VEH_TRAIN || !IsTileDepotType(tile, TRANSPORT_RAIL)) return VETSB_CONTINUE;
/* depot direction */
dir = GetRailDepotDirection(tile);
/* calculate the point where the following wagon should be activated */
/* this depends on the length of the current vehicle */
length = v->u.rail.cached_veh_length;
fract_coord_leave =
((_fractcoords_enter[dir] & 0x0F) + // x
(length + 1) * _deltacoord_leaveoffset[dir]) +
(((_fractcoords_enter[dir] >> 4) + // y
((length + 1) * _deltacoord_leaveoffset[dir+4])) << 4);
fract_coord = (x & 0xF) + ((y & 0xF) << 4);
if (_fractcoords_behind[dir] == fract_coord) {
/* make sure a train is not entering the tile from behind */
return VETSB_CANNOT_ENTER;
} else if (_fractcoords_enter[dir] == fract_coord) {
if (DiagDirToDir(ReverseDiagDir(dir)) == v->direction) {
/* enter the depot */
v->u.rail.track = TRACK_BIT_DEPOT,
v->vehstatus |= VS_HIDDEN; /* hide it */
v->direction = ReverseDir(v->direction);
if (v->next == NULL) VehicleEnterDepot(v);
v->tile = tile;
InvalidateWindowData(WC_VEHICLE_DEPOT, v->tile);
return VETSB_ENTERED_WORMHOLE;
}
} else if (fract_coord_leave == fract_coord) {
if (DiagDirToDir(dir) == v->direction) {
/* leave the depot? */
if ((v = v->next) != NULL) {
v->vehstatus &= ~VS_HIDDEN;
v->u.rail.track = (DiagDirToAxis(dir) == AXIS_X ? TRACK_BIT_X : TRACK_BIT_Y);
}
}
}
return VETSB_CONTINUE;
}
extern const TileTypeProcs _tile_type_rail_procs = {
DrawTile_Track, /* draw_tile_proc */
GetSlopeZ_Track, /* get_slope_z_proc */
ClearTile_Track, /* clear_tile_proc */
GetAcceptedCargo_Track, /* get_accepted_cargo_proc */
GetTileDesc_Track, /* get_tile_desc_proc */
GetTileTrackStatus_Track, /* get_tile_track_status_proc */
ClickTile_Track, /* click_tile_proc */
AnimateTile_Track, /* animate_tile_proc */
TileLoop_Track, /* tile_loop_clear */
ChangeTileOwner_Track, /* change_tile_owner_clear */
NULL, /* get_produced_cargo_proc */
VehicleEnter_Track, /* vehicle_enter_tile_proc */
GetSlopeTileh_Track, /* get_slope_tileh_proc */
};